Initial commit - full huishou project

node_modules/nodegit/vendor/libssh2/docs/AUTHORS

@@ -0,0 +1,79 @@
+ libssh2 is the result of many friendly people. This list is an attempt to
+ mention all contributors. If we've missed anyone, tell us!
+
+ This list of names is a-z sorted.
+
+Adam Gobiowski
+Alexander Holyapin
+Alexander Lamaison
+Alfred Gebert
+Ben Kibbey
+Bjorn Stenborg
+Carlo Bramini
+Cristian Rodríguez
+Daiki Ueno
+Dan Casey
+Dan Fandrich
+Daniel Stenberg
+Dave Hayden
+Dave McCaldon
+David J Sullivan
+David Robins
+Dmitry Smirnov
+Douglas Masterson
+Edink Kadribasic
+Erik Brossler
+Francois Dupoux
+Gellule Xg
+Grubsky Grigory
+Guenter Knauf
+Heiner Steven
+Henrik Nordstrom
+James Housleys
+Jasmeet Bagga
+Jean-Louis Charton
+Jernej Kovacic
+Joey Degges
+John Little
+Jose Baars
+Jussi Mononen
+Kamil Dudka
+Lars Nordin
+Mark McPherson
+Mark Smith
+Markus Moeller
+Matt Lilley
+Matthew Booth
+Maxime Larocque
+Mike Protts
+Mikhail Gusarov
+Neil Gierman
+Olivier Hervieu
+Paul Howarth
+Paul Querna
+Paul Veldkamp
+Peter Krempa
+Peter O'Gorman
+Peter Stuge
+Pierre Joye
+Rafael Kitover
+Romain Bondue
+Sara Golemon
+Satish Mittal
+Sean Peterson
+Selcuk Gueney
+Simon Hart
+Simon Josefsson
+Sofian Brabez
+Steven Ayre
+Steven Dake
+Steven Van Ingelgem
+TJ Saunders
+Tommy Lindgren
+Tor Arntsen
+Vincent Jaulin
+Vincent Torri
+Vlad Grachov
+Wez Furlong
+Yang Tse
+Zl Liu

node_modules/nodegit/vendor/libssh2/docs/BINDINGS

@@ -0,0 +1,29 @@
+
+Creative people have written bindings or interfaces for various environments
+and programming languages. Using one of these bindings allows you to take
+advantage of libssh2 directly from within your favourite language.
+
+The bindings listed below are not part of the libssh2 distribution archives,
+but must be downloaded and installed separately.
+
+Cocoa/Objective-C
+  https://github.com/karelia/libssh2_sftp-Cocoa-wrapper
+
+Haskell
+  FFI bindings - https://hackage.haskell.org/package/libssh2
+
+Perl
+  Net::SSH2 - https://metacpan.org/pod/Net::SSH2
+
+PHP
+  ssh2 - https://pecl.php.net/package/ssh2
+
+Python
+  pylibssh2 - https://pypi.python.org/pypi/pylibssh2
+
+Python-ctypes
+
+  PySsh2 - https://github.com/gellule/PySsh2
+
+Ruby
+  libssh2-ruby - https://github.com/mitchellh/libssh2-ruby

node_modules/nodegit/vendor/libssh2/docs/CMakeLists.txt

@@ -0,0 +1,210 @@
+# Copyright (c) 2014 Alexander Lamaison <alexander.lamaison@gmail.com>
+#
+# Redistribution and use in source and binary forms,
+# with or without modification, are permitted provided
+# that the following conditions are met:
+#
+#   Redistributions of source code must retain the above
+#   copyright notice, this list of conditions and the
+#   following disclaimer.
+#
+#   Redistributions in binary form must reproduce the above
+#   copyright notice, this list of conditions and the following
+#   disclaimer in the documentation and/or other materials
+#   provided with the distribution.
+#
+#   Neither the name of the copyright holder nor the names
+#   of any other contributors may be used to endorse or
+#   promote products derived from this software without
+#   specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+# OF SUCH DAMAGE.
+
+set(MAN_PAGES
+  libssh2_agent_connect.3
+  libssh2_agent_disconnect.3
+  libssh2_agent_free.3
+  libssh2_agent_get_identity.3
+  libssh2_agent_get_identity_path.3
+  libssh2_agent_init.3
+  libssh2_agent_list_identities.3
+  libssh2_agent_set_identity_path.3
+  libssh2_agent_userauth.3
+  libssh2_banner_set.3
+  libssh2_base64_decode.3
+  libssh2_channel_close.3
+  libssh2_channel_direct_tcpip.3
+  libssh2_channel_direct_tcpip_ex.3
+  libssh2_channel_eof.3
+  libssh2_channel_exec.3
+  libssh2_channel_flush.3
+  libssh2_channel_flush_ex.3
+  libssh2_channel_flush_stderr.3
+  libssh2_channel_forward_accept.3
+  libssh2_channel_forward_cancel.3
+  libssh2_channel_forward_listen.3
+  libssh2_channel_forward_listen_ex.3
+  libssh2_channel_free.3
+  libssh2_channel_get_exit_signal.3
+  libssh2_channel_get_exit_status.3
+  libssh2_channel_handle_extended_data.3
+  libssh2_channel_handle_extended_data2.3
+  libssh2_channel_ignore_extended_data.3
+  libssh2_channel_open_ex.3
+  libssh2_channel_open_session.3
+  libssh2_channel_process_startup.3
+  libssh2_channel_read.3
+  libssh2_channel_read_ex.3
+  libssh2_channel_read_stderr.3
+  libssh2_channel_receive_window_adjust.3
+  libssh2_channel_receive_window_adjust2.3
+  libssh2_channel_request_pty.3
+  libssh2_channel_request_pty_ex.3
+  libssh2_channel_request_pty_size.3
+  libssh2_channel_request_pty_size_ex.3
+  libssh2_channel_send_eof.3
+  libssh2_channel_set_blocking.3
+  libssh2_channel_setenv.3
+  libssh2_channel_setenv_ex.3
+  libssh2_channel_shell.3
+  libssh2_channel_subsystem.3
+  libssh2_channel_wait_closed.3
+  libssh2_channel_wait_eof.3
+  libssh2_channel_window_read.3
+  libssh2_channel_window_read_ex.3
+  libssh2_channel_window_write.3
+  libssh2_channel_window_write_ex.3
+  libssh2_channel_write.3
+  libssh2_channel_write_ex.3
+  libssh2_channel_write_stderr.3
+  libssh2_channel_x11_req.3
+  libssh2_channel_x11_req_ex.3
+  libssh2_exit.3
+  libssh2_free.3
+  libssh2_hostkey_hash.3
+  libssh2_init.3
+  libssh2_keepalive_config.3
+  libssh2_keepalive_send.3
+  libssh2_knownhost_add.3
+  libssh2_knownhost_addc.3
+  libssh2_knownhost_check.3
+  libssh2_knownhost_checkp.3
+  libssh2_knownhost_del.3
+  libssh2_knownhost_free.3
+  libssh2_knownhost_get.3
+  libssh2_knownhost_init.3
+  libssh2_knownhost_readfile.3
+  libssh2_knownhost_readline.3
+  libssh2_knownhost_writefile.3
+  libssh2_knownhost_writeline.3
+  libssh2_poll.3
+  libssh2_poll_channel_read.3
+  libssh2_publickey_add.3
+  libssh2_publickey_add_ex.3
+  libssh2_publickey_init.3
+  libssh2_publickey_list_fetch.3
+  libssh2_publickey_list_free.3
+  libssh2_publickey_remove.3
+  libssh2_publickey_remove_ex.3
+  libssh2_publickey_shutdown.3
+  libssh2_scp_recv.3
+  libssh2_scp_recv2.3
+  libssh2_scp_send.3
+  libssh2_scp_send64.3
+  libssh2_scp_send_ex.3
+  libssh2_session_abstract.3
+  libssh2_session_banner_get.3
+  libssh2_session_banner_set.3
+  libssh2_session_block_directions.3
+  libssh2_session_callback_set.3
+  libssh2_session_disconnect.3
+  libssh2_session_disconnect_ex.3
+  libssh2_session_flag.3
+  libssh2_session_free.3
+  libssh2_session_get_blocking.3
+  libssh2_session_get_timeout.3
+  libssh2_session_handshake.3
+  libssh2_session_hostkey.3
+  libssh2_session_init.3
+  libssh2_session_init_ex.3
+  libssh2_session_last_errno.3
+  libssh2_session_last_error.3
+  libssh2_session_set_last_error.3
+  libssh2_session_method_pref.3
+  libssh2_session_methods.3
+  libssh2_session_set_blocking.3
+  libssh2_session_set_timeout.3
+  libssh2_session_startup.3
+  libssh2_session_supported_algs.3
+  libssh2_sftp_close.3
+  libssh2_sftp_close_handle.3
+  libssh2_sftp_closedir.3
+  libssh2_sftp_fsetstat.3
+  libssh2_sftp_fstat.3
+  libssh2_sftp_fstat_ex.3
+  libssh2_sftp_fstatvfs.3
+  libssh2_sftp_fsync.3
+  libssh2_sftp_get_channel.3
+  libssh2_sftp_init.3
+  libssh2_sftp_last_error.3
+  libssh2_sftp_lstat.3
+  libssh2_sftp_mkdir.3
+  libssh2_sftp_mkdir_ex.3
+  libssh2_sftp_open.3
+  libssh2_sftp_open_ex.3
+  libssh2_sftp_opendir.3
+  libssh2_sftp_read.3
+  libssh2_sftp_readdir.3
+  libssh2_sftp_readdir_ex.3
+  libssh2_sftp_readlink.3
+  libssh2_sftp_realpath.3
+  libssh2_sftp_rename.3
+  libssh2_sftp_rename_ex.3
+  libssh2_sftp_rewind.3
+  libssh2_sftp_rmdir.3
+  libssh2_sftp_rmdir_ex.3
+  libssh2_sftp_seek.3
+  libssh2_sftp_seek64.3
+  libssh2_sftp_setstat.3
+  libssh2_sftp_shutdown.3
+  libssh2_sftp_stat.3
+  libssh2_sftp_stat_ex.3
+  libssh2_sftp_statvfs.3
+  libssh2_sftp_symlink.3
+  libssh2_sftp_symlink_ex.3
+  libssh2_sftp_tell.3
+  libssh2_sftp_tell64.3
+  libssh2_sftp_unlink.3
+  libssh2_sftp_unlink_ex.3
+  libssh2_sftp_write.3
+  libssh2_trace.3
+  libssh2_trace_sethandler.3
+  libssh2_userauth_authenticated.3
+  libssh2_userauth_hostbased_fromfile.3
+  libssh2_userauth_hostbased_fromfile_ex.3
+  libssh2_userauth_keyboard_interactive.3
+  libssh2_userauth_keyboard_interactive_ex.3
+  libssh2_userauth_list.3
+  libssh2_userauth_password.3
+  libssh2_userauth_password_ex.3
+  libssh2_userauth_publickey.3
+  libssh2_userauth_publickey_fromfile.3
+  libssh2_userauth_publickey_fromfile_ex.3
+  libssh2_userauth_publickey_frommemory.3
+  libssh2_version.3)
+
+include(GNUInstallDirs)
+install(FILES ${MAN_PAGES} DESTINATION ${CMAKE_INSTALL_MANDIR}/man3)

node_modules/nodegit/vendor/libssh2/docs/HACKING

@@ -0,0 +1,13 @@
+
+libssh2 source code style guide:
+
+ - 4 level indent
+ - spaces-only (no tabs)
+ - open braces on the if/for line:
+
+     if (banana) {
+         go_nuts();
+     }
+
+ - keep source lines shorter than 80 columns
+ - See libssh2-style.el for how to achieve this within Emacs

node_modules/nodegit/vendor/libssh2/docs/HACKING.CRYPTO

@@ -0,0 +1,639 @@
+	Definitions needed to implement a specific crypto library
+
+This document offers some hints about implementing a new crypto library
+interface.
+
+A crypto library interface consists of at least a header file, defining
+entities referenced from the libssh2 core modules.
+Real code implementation (if needed), is left at the implementor's choice.
+
+This document lists the entities that must/may be defined in the header file.
+
+Procedures listed as "void" may indeed have a result type: the void indication
+indicates the libssh2 core modules never use the function result.
+
+
+0) Build system.
+
+Adding a crypto backend to the autotools build system (./configure) is easy:
+
+0.1) Add one new line in configure.ac
+
+m4_set_add([crypto_backends], [newname])
+
+This automatically creates a --with-crypto=newname option.
+
+0.2) Add an m4_case stanza to LIBSSH2_CRYPTO_CHECK in acinclude.m4
+
+This must check for all required libraries, and if found set and AC_SUBST a
+variable with the library linking flags. The recommended method is to use
+LIBSSH2_LIB_HAVE_LINKFLAGS from LIBSSH2_CRYPTO_CHECK, which automatically
+creates and handles a --with-$newname-prefix option and sets an
+LTLIBNEWNAME variable on success.
+
+0.3) Create Makefile.newname.inc in the top-level directory
+
+This must set CRYPTO_CSOURCES, CRYPTO_HHEADERS and CRYPTO_LTLIBS.
+Set CRYPTO_CSOURCES and CRYPTO_HHEADERS to the new backend source files
+and set CRYPTO_LTLIBS to the required library linking parameters, e.g.
+$(LTLIBNEWNAME) as generated by by LIBSSH2_LIB_HAVE_LINKFLAGS.
+
+0.4) Add a new block in src/Makefile.am
+
+if NEWNAME
+include ../Makefile.newname.inc
+endif
+
+
+1) Crypto library initialization/termination.
+
+void libssh2_crypto_init(void);
+Initializes the crypto library. May be an empty macro if not needed.
+
+void libssh2_crypto_exit(void);
+Terminates the crypto library use. May be an empty macro if not needed.
+
+
+2) HMAC
+
+libssh2_hmac_ctx
+Type of an HMAC computation context. Generally a struct.
+Used for all hash algorithms.
+
+void libssh2_hmac_ctx_init(libssh2_hmac_ctx ctx);
+Initializes the HMAC computation context ctx.
+Called before setting-up the hash algorithm.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_update(libssh2_hmac_ctx ctx,
+	                 const unsigned char *data,
+	                 int datalen);
+Continue computation of an HMAC on datalen bytes at data using context ctx.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_final(libssh2_hmac_ctx ctx,
+	                unsigned char output[]);
+Get the computed HMAC from context ctx into the output buffer. The
+minimum data buffer size depends on the HMAC hash algorithm.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_cleanup(libssh2_hmac_ctx *ctx);
+Releases the HMAC computation context at ctx.
+
+
+3) Hash algorithms.
+
+3.1) SHA-1
+Must always be implemented.
+
+SHA_DIGEST_LENGTH
+#define to 20, the SHA-1 digest length.
+
+libssh2_sha1_ctx
+Type of an SHA-1 computation context. Generally a struct.
+
+int libssh2_sha1_init(libssh2_sha1_ctx *x);
+Initializes the SHA-1 computation context at x.
+Returns 1 for success and 0 for failure
+
+void libssh2_sha1_update(libssh2_sha1_ctx ctx,
+	                 const unsigned char *data,
+	                 size_t len);
+Continue computation of SHA-1 on len bytes at data using context ctx.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_sha1_final(libssh2_sha1_ctx ctx,
+                        unsigned char output[SHA_DIGEST_LEN]);
+Get the computed SHA-1 signature from context ctx and store it into the
+output buffer.
+Release the context.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_sha1_init(libssh2_hmac_ctx *ctx,
+	                    const void *key,
+	                    int keylen);
+Setup the HMAC computation context ctx for an HMAC-SHA-1 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.2) SHA-256
+Must always be implemented.
+
+SHA256_DIGEST_LENGTH
+#define to 32, the SHA-256 digest length.
+
+libssh2_sha256_ctx
+Type of an SHA-256 computation context. Generally a struct.
+
+int libssh2_sha256_init(libssh2_sha256_ctx *x);
+Initializes the SHA-256 computation context at x.
+Returns 1 for success and 0 for failure
+
+void libssh2_sha256_update(libssh2_sha256_ctx ctx,
+	                   const unsigned char *data,
+	                   size_t len);
+Continue computation of SHA-256 on len bytes at data using context ctx.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_sha256_final(libssh2_sha256_ctx ctx,
+	                  unsigned char output[SHA256_DIGEST_LENGTH]);
+Gets the computed SHA-256 signature from context ctx into the output buffer.
+Release the context.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+int libssh2_sha256(const unsigned char *message,
+                   unsigned long len,
+                   unsigned char output[SHA256_DIGEST_LENGTH]);
+Computes the SHA-256 signature over the given message of length len and
+store the result into the output buffer.
+Return 1 if error, else 0.
+Note: Seems unused in current code, but defined in each crypto library backend.
+
+LIBSSH2_HMAC_SHA256
+#define as 1 if the crypto library supports HMAC-SHA-256, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+void libssh2_hmac_sha256_init(libssh2_hmac_ctx *ctx,
+	                      const void *key,
+	                      int keylen);
+Setup the HMAC computation context ctx for an HMAC-256 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.3) SHA-512
+LIBSSH2_HMAC_SHA512
+#define as 1 if the crypto library supports HMAC-SHA-512, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+SHA512_DIGEST_LENGTH
+#define to 64, the SHA-512 digest length.
+
+void libssh2_hmac_sha512_init(libssh2_hmac_ctx *ctx,
+	                      const void *key,
+	                      int keylen);
+Setup the HMAC computation context ctx for an HMAC-512 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.4) MD5
+LIBSSH2_MD5
+#define to 1 if the crypto library supports MD5, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+MD5_DIGEST_LENGTH
+#define to 16, the MD5 digest length.
+
+libssh2_md5_ctx
+Type of an MD5 computation context. Generally a struct.
+
+int libssh2_md5_init(libssh2_md5_ctx *x);
+Initializes the MD5 computation context at x.
+Returns 1 for success and 0 for failure
+
+void libssh2_md5_update(libssh2_md5_ctx ctx,
+	                const unsigned char *data,
+	                size_t len);
+Continues computation of MD5 on len bytes at data using context ctx.
+Returns 1 for success and 0 for failure.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_md5_final(libssh2_md5_ctx ctx,
+	               unsigned char output[MD5_DIGEST_LENGTH]);
+Gets the computed MD5 signature from context ctx into the output buffer.
+Release the context.
+Note: if the ctx parameter is modified by the underlying code,
+this procedure must be implemented as a macro to map ctx --> &ctx.
+
+void libssh2_hmac_md5_init(libssh2_hmac_ctx *ctx,
+	                   const void *key,
+	                   int keylen);
+Setup the HMAC computation context ctx for an HMAC-MD5 computation using the
+keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+
+3.5) RIPEMD-160
+LIBSSH2_HMAC_RIPEMD
+#define as 1 if the crypto library supports HMAC-RIPEMD-160, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+void libssh2_hmac_ripemd160_init(libssh2_hmac_ctx *ctx,
+	                         const void *key,
+	                         int keylen);
+Setup the HMAC computation context ctx for an HMAC-RIPEMD-160 computation using
+the keylen-byte key. Is invoked just after libssh2_hmac_ctx_init().
+Returns 1 for success and 0 for failure.
+
+
+4) Bidirectional key ciphers.
+
+_libssh2_cipher_ctx
+Type of a cipher computation context.
+
+_libssh2_cipher_type(name);
+Macro defining name as storage identifying a cipher algorithm for
+the crypto library interface. No trailing semicolon.
+
+int _libssh2_cipher_init(_libssh2_cipher_ctx *h,
+                         _libssh2_cipher_type(algo),
+                         unsigned char *iv,
+                         unsigned char *secret,
+                         int encrypt);
+Creates a cipher context for the given algorithm with the initialization vector
+iv and the secret key secret. Prepare for encryption or decryption depending on
+encrypt.
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_cipher_crypt(_libssh2_cipher_ctx *ctx,
+                          _libssh2_cipher_type(algo),
+                          int encrypt,
+                          unsigned char *block,
+                          size_t blocksize);
+Encrypt or decrypt in-place data at (block, blocksize) using the given
+context and/or algorithm.
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+void _libssh2_cipher_dtor(_libssh2_cipher_ctx *ctx);
+Release cipher context at ctx.
+
+4.1) AES
+4.1.1) AES in CBC block mode.
+LIBSSH2_AES
+#define as 1 if the crypto library supports AES in CBC mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_aes128
+AES-128-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes192
+AES-192-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes256
+AES-256-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.1.2) AES in CTR block mode.
+LIBSSH2_AES_CTR
+#define as 1 if the crypto library supports AES in CTR mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_aes128ctr
+AES-128-CTR algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes192ctr
+AES-192-CTR algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+_libssh2_cipher_aes256ctr
+AES-256-CTR algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.2) Blowfish in CBC block mode.
+LIBSSH2_BLOWFISH
+#define as 1 if the crypto library supports blowfish in CBC mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_blowfish
+Blowfish-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.3) RC4.
+LIBSSH2_RC4
+#define as 1 if the crypto library supports RC4 (arcfour), else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_arcfour
+RC4 algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.4) CAST5 in CBC block mode.
+LIBSSH2_CAST
+#define 1 if the crypto library supports cast, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_cast5
+CAST5-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+4.5) Tripple DES in CBC block mode.
+LIBSSH2_3DES
+#define as 1 if the crypto library supports TripleDES in CBC mode, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+_libssh2_cipher_3des
+TripleDES-CBC algorithm identifier initializer.
+#define with constant value of type _libssh2_cipher_type().
+
+
+5) Diffie-Hellman support.
+
+5.1) Diffie-Hellman context.
+_libssh2_dh_ctx
+Type of a Diffie-Hellman computation context.
+Must always be defined.
+
+5.2) Diffie-Hellman computation procedures.
+void libssh2_dh_init(_libssh2_dh_ctx *dhctx);
+Initializes the Diffie-Hellman context at `dhctx'. No effective context
+creation needed here.
+
+int libssh2_dh_key_pair(_libssh2_dh_ctx *dhctx, _libssh2_bn *public,
+                        _libssh2_bn *g, _libssh2_bn *p, int group_order,
+                        _libssh2_bn_ctx *bnctx);
+Generates a Diffie-Hellman key pair using base `g', prime `p' and the given
+`group_order'. Can use the given big number context `bnctx' if needed.
+The private key is stored as opaque in the Diffie-Hellman context `*dhctx' and
+the public key is returned in `public'.
+0 is returned upon success, else -1.
+
+int libssh2_dh_secret(_libssh2_dh_ctx *dhctx, _libssh2_bn *secret,
+                      _libssh2_bn *f, _libssh2_bn *p, _libssh2_bn_ctx * bnctx)
+Computes the Diffie-Hellman secret from the previously created context `*dhctx',
+the public key `f' from the other party and the same prime `p' used at
+context creation. The result is stored in `secret'.
+0 is returned upon success, else -1.
+
+void libssh2_dh_dtor(_libssh2_dh_ctx *dhctx)
+Destroys Diffie-Hellman context at `dhctx' and resets its storage.
+
+
+6) Big numbers.
+Positive multi-byte integers support is sufficient.
+
+6.1) Computation contexts.
+This has a real meaning if the big numbers computations need some context
+storage. If not, use a dummy type and functions (macros).
+
+_libssh2_bn_ctx
+Type of multiple precision computation context. May not be empty. if not used,
+#define as char, for example.
+
+_libssh2_bn_ctx _libssh2_bn_ctx_new(void);
+Returns a new multiple precision computation context.
+
+void _libssh2_bn_ctx_free(_libssh2_bn_ctx ctx);
+Releases a multiple precision computation context.
+
+6.2) Computation support.
+_libssh2_bn
+Type of multiple precision numbers (aka bignumbers or huge integers) for the
+crypto library.
+
+_libssh2_bn * _libssh2_bn_init(void);
+Creates a multiple precision number (preset to zero).
+
+_libssh2_bn * _libssh2_bn_init_from_bin(void);
+Create a multiple precision number intended to be set by the
+_libssh2_bn_from_bin() function (see below). Unlike _libssh2_bn_init(), this
+code may be a dummy initializer if the _libssh2_bn_from_bin() actually
+allocates the number. Returns a value of type _libssh2_bn *.
+
+void _libssh2_bn_free(_libssh2_bn *bn);
+Destroys the multiple precision number at bn.
+
+unsigned long _libssh2_bn_bytes(_libssh2_bn *bn);
+Get the number of bytes needed to store the bits of the multiple precision
+number at bn.
+
+unsigned long _libssh2_bn_bits(_libssh2_bn *bn);
+Returns the number of bits of multiple precision number at bn.
+
+int _libssh2_bn_set_word(_libssh2_bn *bn, unsigned long val);
+Sets the value of bn to val.
+Returns 1 on success, 0 otherwise.
+
+_libssh2_bn * _libssh2_bn_from_bin(_libssh2_bn *bn, int len,
+	                           const unsigned char *val);
+Converts the positive integer in big-endian form of length len at val
+into a _libssh2_bn and place it in bn. If bn is NULL, a new _libssh2_bn is
+created.
+Returns a pointer to target _libssh2_bn or NULL if error.
+
+int _libssh2_bn_to_bin(_libssh2_bn *bn, unsigned char *val);
+Converts the absolute value of bn into big-endian form and store it at
+val. val must point to _libssh2_bn_bytes(bn) bytes of memory.
+Returns the length of the big-endian number.
+
+
+7) Private key algorithms.
+Format of an RSA public key:
+a) "ssh-rsa".
+b) RSA exponent, MSB first, with high order bit = 0.
+c) RSA modulus, MSB first, with high order bit = 0.
+Each item is preceded by its 32-bit byte length, MSB first.
+
+Format of a DSA public key:
+a) "ssh-dss".
+b) p, MSB first, with high order bit = 0.
+c) q, MSB first, with high order bit = 0.
+d) g, MSB first, with high order bit = 0.
+e) pub_key, MSB first, with high order bit = 0.
+Each item is preceded by its 32-bit byte length, MSB first.
+
+int _libssh2_pub_priv_keyfile(LIBSSH2_SESSION *session,
+                              unsigned char **method,
+                              size_t *method_len,
+                              unsigned char **pubkeydata,
+                              size_t *pubkeydata_len,
+                              const char *privatekey,
+                              const char *passphrase);
+Reads a private key from file privatekey and extract the public key -->
+(pubkeydata, pubkeydata_len). Store the associated method (ssh-rsa or ssh-dss)
+into (method, method_len).
+Both buffers have to be allocated using LIBSSH2_ALLOC().
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_pub_priv_keyfilememory(LIBSSH2_SESSION *session,
+                                    unsigned char **method,
+                                    size_t *method_len,
+                                    unsigned char **pubkeydata,
+                                    size_t *pubkeydata_len,
+                                    const char *privatekeydata,
+                                    size_t privatekeydata_len,
+                                    const char *passphrase);
+Gets a private key from bytes at (privatekeydata, privatekeydata_len) and
+extract the public key --> (pubkeydata, pubkeydata_len). Store the associated
+method (ssh-rsa or ssh-dss) into (method, method_len).
+Both buffers have to be allocated using LIBSSH2_ALLOC().
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+7.1) RSA
+LIBSSH2_RSA
+#define as 1 if the crypto library supports RSA, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+libssh2_rsa_ctx
+Type of an RSA computation context. Generally a struct.
+
+int _libssh2_rsa_new(libssh2_rsa_ctx **rsa,
+                     const unsigned char *edata,
+                     unsigned long elen,
+                     const unsigned char *ndata,
+                     unsigned long nlen,
+                     const unsigned char *ddata,
+                     unsigned long dlen,
+                     const unsigned char *pdata,
+                     unsigned long plen,
+                     const unsigned char *qdata,
+                     unsigned long qlen,
+                     const unsigned char *e1data,
+                     unsigned long e1len,
+                     const unsigned char *e2data,
+                     unsigned long e2len,
+                     const unsigned char *coeffdata, unsigned long coefflen);
+Creates a new context for RSA computations from key source values:
+	pdata, plen	Prime number p. Only used if private key known (ddata).
+	qdata, qlen	Prime number q. Only used if private key known (ddata).
+	ndata, nlen	Modulus n.
+	edata, elen	Exponent e.
+	ddata, dlen	e^-1 % phi(n) = private key. May be NULL if unknown.
+	e1data, e1len	dp = d % (p-1). Only used if private key known (dtata).
+	e2data, e2len	dq = d % (q-1). Only used if private key known (dtata).
+	coeffdata, coefflen	q^-1 % p. Only used if private key known.
+Returns 0 if OK.
+This procedure is already prototyped in crypto.h.
+Note: the current generic code only calls this function with e and n (public
+key parameters): unless used internally by the backend, it is not needed to
+support the private key and the other parameters here.
+
+int _libssh2_rsa_new_private(libssh2_rsa_ctx **rsa,
+                             LIBSSH2_SESSION *session,
+                             const char *filename,
+                             unsigned const char *passphrase);
+Reads an RSA private key from file filename into a new RSA context.
+Must call _libssh2_init_if_needed().
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_rsa_new_private_frommemory(libssh2_rsa_ctx **rsa,
+                                        LIBSSH2_SESSION *session,
+                                        const char *data,
+					size_t data_len,
+                                        unsigned const char *passphrase);
+Gets an RSA private key from data into a new RSA context.
+Must call _libssh2_init_if_needed().
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_rsa_sha1_verify(libssh2_rsa_ctx *rsa,
+                             const unsigned char *sig,
+                             unsigned long sig_len,
+                             const unsigned char *m, unsigned long m_len);
+Verify (sig, siglen) signature of (m, m_len) using an SHA-1 hash and the
+RSA context.
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_rsa_sha1_signv(LIBSSH2_SESSION *session,
+	                    unsigned char **sig, size_t *siglen,
+	                    int count, const struct iovec vector[],
+	                    libssh2_rsa_ctx *ctx);
+RSA signs the SHA-1 hash computed over the count data chunks in vector.
+Signature is stored at (sig, siglen).
+Signature buffer must be allocated from the given session.
+Returns 0 if OK, else -1.
+Note: this procedure is optional: if provided, it MUST be defined as a macro.
+
+int _libssh2_rsa_sha1_sign(LIBSSH2_SESSION *session,
+                           libssh2_rsa_ctx *rsactx,
+                           const unsigned char *hash,
+                           size_t hash_len,
+                           unsigned char **signature,
+                           size_t *signature_len);
+RSA signs the (hash, hashlen) SHA-1 hash bytes and stores the allocated
+signature at (signature, signature_len).
+Signature buffer must be allocated from the given session.
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+Note: this procedure is not used if macro _libssh2_rsa_sha1_signv() is defined.
+
+void _libssh2_rsa_free(libssh2_rsa_ctx *rsactx);
+Releases the RSA computation context at rsactx.
+
+
+7.2) DSA
+LIBSSH2_DSA
+#define as 1 if the crypto library supports DSA, else 0.
+If defined as 0, the rest of this section can be omitted.
+
+
+libssh2_dsa_ctx
+Type of a DSA computation context. Generally a struct.
+
+int _libssh2_dsa_new(libssh2_dsa_ctx **dsa,
+                     const unsigned char *pdata,
+                     unsigned long plen,
+                     const unsigned char *qdata,
+                     unsigned long qlen,
+                     const unsigned char *gdata,
+                     unsigned long glen,
+                     const unsigned char *ydata,
+                     unsigned long ylen,
+                     const unsigned char *x, unsigned long x_len);
+Creates a new context for DSA computations from source key values:
+	pdata, plen	Prime number p. Only used if private key known (ddata).
+	qdata, qlen	Prime number q. Only used if private key known (ddata).
+	gdata, glen	G number.
+	ydata, ylen	Public key.
+	xdata, xlen	Private key. Only taken if xlen non-zero.
+Returns 0 if OK.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_new_private(libssh2_dsa_ctx **dsa,
+                             LIBSSH2_SESSION *session,
+                             const char *filename,
+                             unsigned const char *passphrase);
+Gets a DSA private key from file filename into a new DSA context.
+Must call _libssh2_init_if_needed().
+Return 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_new_private_frommemory(libssh2_dsa_ctx **dsa,
+                                        LIBSSH2_SESSION *session,
+                                        const char *data,
+					size_t data_len,
+                                        unsigned const char *passphrase);
+Gets a DSA private key from the data_len-bytes data into a new DSA context.
+Must call _libssh2_init_if_needed().
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_sha1_verify(libssh2_dsa_ctx *dsactx,
+                             const unsigned char *sig,
+                             const unsigned char *m, unsigned long m_len);
+Verify (sig, siglen) signature of (m, m_len) using an SHA-1 hash and the
+DSA context.
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+int _libssh2_dsa_sha1_sign(libssh2_dsa_ctx *dsactx,
+                           const unsigned char *hash,
+                           unsigned long hash_len, unsigned char *sig);
+DSA signs the (hash, hash_len) data using SHA-1 and store the signature at sig.
+Returns 0 if OK, else -1.
+This procedure is already prototyped in crypto.h.
+
+void _libssh2_dsa_free(libssh2_dsa_ctx *dsactx);
+Releases the DSA computation context at dsactx.
+
+
+8) Miscellaneous
+
+void libssh2_prepare_iovec(struct iovec *vector, unsigned int len);
+Prepare len consecutive iovec slots before using them.
+In example, this is needed to preset unused structure slacks on platforms
+requiring it.
+If this is not needed, it should be defined as an empty macro.
+
+void _libssh2_random(unsigned char *buf, int len);
+Store len random bytes at buf.

node_modules/nodegit/vendor/libssh2/docs/INSTALL_AUTOTOOLS

@@ -0,0 +1,355 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+When Building directly from Master
+==================================
+
+If you want to build directly from the git repository, you must first
+generate the configure script and Makefile using autotools. There is
+a convenience script that calls all tools in the correct order. Make
+sure that autoconf, automake and libtool are installed on your system,
+then execute the following script:
+
+  ./buildconf
+
+After executing this script, you can build the project as usual:
+
+  ./configure
+  make
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
+More configure options
+======================
+
+Some ./configure options deserve additional comments:
+
+ * --enable-crypt-none
+
+	The SSH2 Transport allows for unencrypted data
+	transmission using the "none" cipher.  Because this is
+	such a huge security hole, it is typically disabled on
+	SSH2 implementations and is disabled in libssh2 by
+	default as well.
+
+	Enabling this option will allow for "none" as a
+	negotiable method, however it still requires that the
+	method be advertized by the remote end and that no
+	more-preferable methods are available.
+
+ * --enable-mac-none
+
+	The SSH2 Transport also allows implementations to
+	forego a message authentication code.  While this is
+	less of a security risk than using a "none" cipher, it
+	is still not recommended as disabling MAC hashes
+	removes a layer of security.
+
+	Enabling this option will allow for "none" as a
+	negotiable method, however it still requires that the
+	method be advertized by the remote end and that no
+	more-preferable methods are available.
+
+ * --disable-gex-new
+
+	The diffie-hellman-group-exchange-sha1 (dh-gex) key
+	exchange method originally defined an exchange
+	negotiation using packet type 30 to request a
+	generation pair based on a single target value.  Later
+	refinement of dh-gex provided for range and target
+	values.  By default libssh2 will use the newer range
+	method.
+
+	If you experience trouble connecting to an old SSH
+	server using dh-gex, try this option to fallback on
+	the older more reliable method.
+
+ * --with-libgcrypt
+ * --without-libgcrypt
+ * --with-libgcrypt-prefix=DIR
+
+	libssh2 can use the Libgcrypt library
+	(https://www.gnupg.org/) for cryptographic operations.
+        One of the cryptographic libraries is required.
+
+	Configure will attempt to locate Libgcrypt
+	automatically.
+
+	If your installation of Libgcrypt is in another
+	location, specify it using --with-libgcrypt-prefix.
+
+ * --with-openssl
+ * --without-openssl
+ * --with-libssl-prefix=[DIR]
+
+	libssh2 can use the OpenSSL library
+	(https://www.openssl.org) for cryptographic operations.
+        One of the cryptographic libraries is required.
+
+	Configure will attempt to locate OpenSSL in the
+	default location.
+
+	If your installation of OpenSSL is in another
+	location, specify it using --with-libssl-prefix.
+
+ * --with-mbedtls
+ * --without-mbedtls
+ * --with-libmbedtls-prefix=[DIR]
+
+        libssh2 can use the mbedTLS library
+        (https://tls.mbed.org) for cryptographic operations.
+        One of the cryptographic libraries is required.
+
+        Configure will attempt to locate mbedTLS in the
+        default location.
+
+        If your installation of mbedTLS is in another
+        location, specify it using --with-libmbedtls-prefix.
+
+ * --with-libz
+ * --without-libz
+ * --with-libz-prefix=[DIR]
+
+	If present, libssh2 will attempt to use the zlib
+	(http://www.zlib.org) for payload compression, however
+	zlib is not required.
+
+	If your installation of Libz is in another location,
+	specify it using --with-libz-prefix.
+
+ * --enable-debug
+
+	Will make the build use more pedantic and strict compiler
+	options as well as enable the libssh2_trace() function (for
+	showing debug traces).

node_modules/nodegit/vendor/libssh2/docs/INSTALL_CMAKE

@@ -0,0 +1,179 @@
+License: see COPYING
+
+Source code: https://github.com/libssh2/libssh2
+
+Web site source code: https://github.com/libssh2/www
+
+Installation instructions are in docs/INSTALL
+=======
+To build libssh2 you will need CMake v2.8 or later [1] and one of the
+following cryptography libraries:
+
+* OpenSSL
+* Libgcrypt
+* WinCNG
+* mbedTLS
+
+Getting started
+---------------
+
+If you are happy with the default options, make a new build directory,
+change to it, configure the build environment and build the project:
+
+  mkdir bin
+  cd bin
+  cmake ..
+  cmake --build .
+
+libssh2 will be built as a static library and will use any
+cryptography library available.  The library binary will be put in
+`bin/src`, with the examples in `bin/example` and the tests in
+`bin/tests`.
+
+Customising the build
+---------------------
+
+Of course, you might want to customise the build options.  You can
+pass the options to CMake on the command line:
+
+  cmake -D<option>=<value> ..
+
+The following options are available:
+
+ * `BUILD_SHARED_LIBS=OFF`
+
+    Determines whether libssh2 is built as a static library or as a
+    shared library (.dll/.so).  Can be `ON` or `OFF`.
+
+ * `CRYPTO_BACKEND=`
+
+    Chooses a specific cryptography library to use for cryptographic
+    operations.  Can be `OpenSSL` (https://www.openssl.org),
+    `Libgcrypt` (https://www.gnupg.org/), `WinCNG` (Windows Vista+),
+    `mbedTLS` (https://tls.mbed.org/) or blank to use any library available.
+
+    CMake will attempt to locate the libraries automatically.  See [2]
+    for more information.
+
+ * `ENABLE_ZLIB_COMPRESSION=OFF`
+
+    Will use zlib (http://www.zlib.org) for payload compression.  Can
+    be `ON` or `OFF`.
+
+ * `ENABLE_CRYPT_NONE=OFF`
+
+    The SSH2 Transport allows for unencrypted data transmission using
+    the "none" cipher.  Because this is such a huge security hole, it
+    is typically disabled on SSH2 implementations and is disabled in
+    libssh2 by default as well.
+
+    Enabling this option will allow for "none" as a negotiable method,
+    however it still requires that the method be advertized by the
+    remote end and that no more-preferable methods are available.
+
+ * `ENABLE_MAC_NONE=OFF`
+
+    The SSH2 Transport also allows implementations to forego a message
+    authentication code.  While this is less of a security risk than
+    using a "none" cipher, it is still not recommended as disabling
+    MAC hashes removes a layer of security.
+
+    Enabling this option will allow for "none" as a negotiable method,
+    however it still requires that the method be advertized by the
+    remote end and that no more-preferable methods are available.
+
+ * `ENABLE_GEX_NEW=ON`
+
+    The diffie-hellman-group-exchange-sha1 (dh-gex) key exchange
+    method originally defined an exchange negotiation using packet
+    type 30 to request a generation pair based on a single target
+    value.  Later refinement of dh-gex provided for range and target
+    values.  By default libssh2 will use the newer range method.
+
+    If you experience trouble connecting to an old SSH server using
+    dh-gex, try this option to fallback on the older more reliable
+    method.
+
+ * `ENABLE_DEBUG_LOGGING=ON` in Debug, `=OFF` in Release
+
+    Will enable the libssh2_trace() function for showing debug traces.
+
+ * `CLEAR_MEMORY=ON`
+
+    Securely zero memory before freeing it (if the backend supports this).
+
+Build tools
+-----------
+
+The previous examples used CMake to start the build using:
+
+  cmake --build .
+
+Alternatively, once CMake has configured your project, you can just
+use your own build tool, e.g GNU make, Visual Studio, etc., from that
+point onwards.
+
+Tests
+-----
+
+To test the build, run the appropriate test target for your build
+system.  For example:
+
+  cmake --build . --target test
+or
+  cmake --build . --target RUN_TESTS
+
+How do I use libssh2 in my project if my project doesn't use CMake?
+-------------------------------------------------------------------
+
+If you are not using CMake for your own project, install libssh2
+
+  cmake <libssh2 source location>
+  cmake --build .
+  cmake --build . --target install
+or
+  cmake --build . --target INSTALL
+
+and then specify the install location to your project in the normal
+way for your build environment.  If you don't like the default install
+location, add `-DCMAKE_INSTALL_PREFIX=<chosen prefix>` when initially
+configuring the project.
+
+How can I use libssh2 in my project if it also uses CMake?
+----------------------------------------------------------
+
+If your own project also uses CMake, you don't need to worry about
+setting it up with libssh2's location.  Just add just the following
+lines and CMake will find libssh2 on your system, set up the necessary
+paths and link the library with your binary.
+
+    find_package(Libssh2 REQUIRED CONFIG)
+    target_link_libraries(my_project_target Libssh2::libssh2)
+
+Of course, you still have to make libssh2 available on your system
+first.  You can install it in the traditional way shown above, but you
+don't have to.  Instead you can just build it, which will export its
+location to the user package registry [3] where `find_package` will
+find it.
+
+You can even combine the two steps using a so-called 'superbuild'
+project [4] that downloads, builds and exports libssh2, and then
+builds your project:
+
+    include(ExternalProject)
+
+    ExternalProject_Add(
+        Libssh2
+        URL <libssh2 download location>
+        URL_HASH SHA1=<libssh2 archive SHA1>
+        INSTALL_COMMAND "")
+
+    ExternalProject_Add(
+        MyProject DEPENDS Libssh2
+        SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/src
+        INSTALL_COMMAND "")
+
+[1] https://www.cmake.org/cmake/resources/software.html
+[2] https://www.cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html
+[3] https://www.cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html#package-registry
+[4] https://blog.kitware.com/wp-content/uploads/2016/01/kitware_quarterly1009.pdf

node_modules/nodegit/vendor/libssh2/docs/Makefile

@@ -0,0 +1,729 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# docs/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# $Id: Makefile.am,v 1.37 2009/03/26 15:41:15 bagder Exp $
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/libssh2
+pkgincludedir = $(includedir)/libssh2
+pkglibdir = $(libdir)/libssh2
+pkglibexecdir = $(libexecdir)/libssh2
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = docs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/libssh2_config.h \
+	$(top_builddir)/example/libssh2_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man3dir = $(mandir)/man3
+am__installdirs = "$(DESTDIR)$(man3dir)"
+NROFF = nroff
+MANS = $(dist_man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in AUTHORS TODO
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/tylerw/github/nodegit/nodegit/vendor/libssh2/missing aclocal-1.16
+ALLOCA = 
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AS = as
+AUTOCONF = ${SHELL} /home/tylerw/github/nodegit/nodegit/vendor/libssh2/missing autoconf
+AUTOHEADER = ${SHELL} /home/tylerw/github/nodegit/nodegit/vendor/libssh2/missing autoheader
+AUTOMAKE = ${SHELL} /home/tylerw/github/nodegit/nodegit/vendor/libssh2/missing automake-1.16
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = dlltool
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GREP = /bin/grep
+HAVE_LIBBCRYPT = 
+HAVE_LIBCRYPT32 = 
+HAVE_LIBGCRYPT = 
+HAVE_LIBMBEDCRYPTO = 
+HAVE_LIBSSL = yes
+HAVE_LIBZ = yes
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS = 
+LIBBCRYPT = 
+LIBBCRYPT_PREFIX = 
+LIBCRYPT32 = 
+LIBCRYPT32_PREFIX = 
+LIBGCRYPT = 
+LIBGCRYPT_PREFIX = 
+LIBMBEDCRYPTO = 
+LIBMBEDCRYPTO_PREFIX = 
+LIBOBJS = 
+LIBS = 
+LIBSREQUIRED = libssl libcrypto zlib
+LIBSSH2VER = 1.9.0
+LIBSSL = -lssl -lcrypto
+LIBSSL_PREFIX = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBZ = -lz
+LIBZ_PREFIX = 
+LIPO = 
+LN_S = ln -s
+LTLIBBCRYPT = 
+LTLIBCRYPT32 = 
+LTLIBGCRYPT = 
+LTLIBMBEDCRYPTO = 
+LTLIBOBJS = 
+LTLIBSSL = -lssl -lcrypto
+LTLIBZ = -lz
+LT_SYS_LIBRARY_PATH = 
+MAINT = #
+MAKEINFO = ${SHELL} /home/tylerw/github/nodegit/nodegit/vendor/libssh2/missing makeinfo
+MANIFEST_TOOL = :
+MKDIR_P = /bin/mkdir -p
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = libssh2
+PACKAGE_BUGREPORT = libssh2-devel@cool.haxx.se
+PACKAGE_NAME = libssh2
+PACKAGE_STRING = libssh2 -
+PACKAGE_TARNAME = libssh2
+PACKAGE_URL = 
+PACKAGE_VERSION = -
+PATH_SEPARATOR = :
+RANLIB = ranlib
+SED = /bin/sed
+SET_MAKE = 
+SHELL = /bin/bash
+SSHD = 
+STRIP = strip
+VERSION = -
+abs_builddir = /home/tylerw/github/nodegit/nodegit/vendor/libssh2/docs
+abs_srcdir = /home/tylerw/github/nodegit/nodegit/vendor/libssh2/docs
+abs_top_builddir = /home/tylerw/github/nodegit/nodegit/vendor/libssh2
+abs_top_srcdir = /home/tylerw/github/nodegit/nodegit/vendor/libssh2
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_DUMPBIN = 
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /home/tylerw/github/nodegit/nodegit/vendor/libssh2/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+runstatedir = ${localstatedir}/run
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+EXTRA_DIST = template.3 BINDINGS INSTALL_AUTOTOOLS INSTALL_CMAKE HACKING TODO	\
+ AUTHORS CMakeLists.txt HACKING.CRYPTO SECURITY.md
+
+dist_man_MANS = \
+	libssh2_agent_connect.3 \
+	libssh2_agent_disconnect.3 \
+	libssh2_agent_free.3 \
+	libssh2_agent_get_identity.3 \
+	libssh2_agent_get_identity_path.3 \
+	libssh2_agent_init.3 \
+	libssh2_agent_list_identities.3 \
+	libssh2_agent_set_identity_path.3 \
+	libssh2_agent_userauth.3 \
+	libssh2_banner_set.3 \
+	libssh2_base64_decode.3 \
+	libssh2_channel_close.3 \
+	libssh2_channel_direct_tcpip.3 \
+	libssh2_channel_direct_tcpip_ex.3 \
+	libssh2_channel_eof.3 \
+	libssh2_channel_exec.3 \
+	libssh2_channel_flush.3 \
+	libssh2_channel_flush_ex.3 \
+	libssh2_channel_flush_stderr.3 \
+	libssh2_channel_forward_accept.3 \
+	libssh2_channel_forward_cancel.3 \
+	libssh2_channel_forward_listen.3 \
+	libssh2_channel_forward_listen_ex.3 \
+	libssh2_channel_free.3 \
+	libssh2_channel_get_exit_signal.3 \
+	libssh2_channel_get_exit_status.3 \
+	libssh2_channel_handle_extended_data.3 \
+	libssh2_channel_handle_extended_data2.3 \
+	libssh2_channel_ignore_extended_data.3 \
+	libssh2_channel_open_ex.3 \
+	libssh2_channel_open_session.3 \
+	libssh2_channel_process_startup.3 \
+	libssh2_channel_read.3 \
+	libssh2_channel_read_ex.3 \
+	libssh2_channel_read_stderr.3 \
+	libssh2_channel_receive_window_adjust.3 \
+	libssh2_channel_receive_window_adjust2.3 \
+	libssh2_channel_request_pty.3 \
+	libssh2_channel_request_pty_ex.3 \
+	libssh2_channel_request_pty_size.3 \
+	libssh2_channel_request_pty_size_ex.3 \
+	libssh2_channel_send_eof.3 \
+	libssh2_channel_set_blocking.3 \
+	libssh2_channel_setenv.3 \
+	libssh2_channel_setenv_ex.3 \
+	libssh2_channel_shell.3 \
+	libssh2_channel_subsystem.3 \
+	libssh2_channel_wait_closed.3 \
+	libssh2_channel_wait_eof.3 \
+	libssh2_channel_window_read.3 \
+	libssh2_channel_window_read_ex.3 \
+	libssh2_channel_window_write.3 \
+	libssh2_channel_window_write_ex.3 \
+	libssh2_channel_write.3 \
+	libssh2_channel_write_ex.3 \
+	libssh2_channel_write_stderr.3 \
+	libssh2_channel_x11_req.3 \
+	libssh2_channel_x11_req_ex.3 \
+	libssh2_exit.3 \
+	libssh2_free.3 \
+	libssh2_hostkey_hash.3 \
+	libssh2_init.3 \
+	libssh2_keepalive_config.3 \
+	libssh2_keepalive_send.3 \
+	libssh2_knownhost_add.3 \
+	libssh2_knownhost_addc.3 \
+	libssh2_knownhost_check.3 \
+	libssh2_knownhost_checkp.3 \
+	libssh2_knownhost_del.3 \
+	libssh2_knownhost_free.3 \
+	libssh2_knownhost_get.3 \
+	libssh2_knownhost_init.3 \
+	libssh2_knownhost_readfile.3 \
+	libssh2_knownhost_readline.3 \
+	libssh2_knownhost_writefile.3 \
+	libssh2_knownhost_writeline.3 \
+	libssh2_poll.3 \
+	libssh2_poll_channel_read.3 \
+	libssh2_publickey_add.3 \
+	libssh2_publickey_add_ex.3 \
+	libssh2_publickey_init.3 \
+	libssh2_publickey_list_fetch.3 \
+	libssh2_publickey_list_free.3 \
+	libssh2_publickey_remove.3 \
+	libssh2_publickey_remove_ex.3 \
+	libssh2_publickey_shutdown.3 \
+	libssh2_scp_recv.3 \
+	libssh2_scp_recv2.3 \
+	libssh2_scp_send.3 \
+	libssh2_scp_send64.3 \
+	libssh2_scp_send_ex.3 \
+	libssh2_session_abstract.3 \
+	libssh2_session_banner_get.3 \
+	libssh2_session_banner_set.3 \
+	libssh2_session_block_directions.3 \
+	libssh2_session_callback_set.3 \
+	libssh2_session_disconnect.3 \
+	libssh2_session_disconnect_ex.3 \
+	libssh2_session_flag.3 \
+	libssh2_session_free.3 \
+	libssh2_session_get_blocking.3 \
+	libssh2_session_get_timeout.3 \
+	libssh2_session_handshake.3 \
+	libssh2_session_hostkey.3 \
+	libssh2_session_init.3 \
+	libssh2_session_init_ex.3 \
+	libssh2_session_last_errno.3 \
+	libssh2_session_last_error.3 \
+	libssh2_session_set_last_error.3 \
+	libssh2_session_method_pref.3 \
+	libssh2_session_methods.3 \
+	libssh2_session_set_blocking.3 \
+	libssh2_session_set_timeout.3 \
+	libssh2_session_startup.3 \
+	libssh2_session_supported_algs.3 \
+	libssh2_sftp_close.3 \
+	libssh2_sftp_close_handle.3 \
+	libssh2_sftp_closedir.3 \
+	libssh2_sftp_fsetstat.3 \
+	libssh2_sftp_fstat.3 \
+	libssh2_sftp_fstat_ex.3 \
+	libssh2_sftp_fstatvfs.3 \
+	libssh2_sftp_fsync.3 \
+	libssh2_sftp_get_channel.3 \
+	libssh2_sftp_init.3 \
+	libssh2_sftp_last_error.3 \
+	libssh2_sftp_lstat.3 \
+	libssh2_sftp_mkdir.3 \
+	libssh2_sftp_mkdir_ex.3 \
+	libssh2_sftp_open.3 \
+	libssh2_sftp_open_ex.3 \
+	libssh2_sftp_opendir.3 \
+	libssh2_sftp_read.3 \
+	libssh2_sftp_readdir.3 \
+	libssh2_sftp_readdir_ex.3 \
+	libssh2_sftp_readlink.3 \
+	libssh2_sftp_realpath.3 \
+	libssh2_sftp_rename.3 \
+	libssh2_sftp_rename_ex.3 \
+	libssh2_sftp_rewind.3 \
+	libssh2_sftp_rmdir.3 \
+	libssh2_sftp_rmdir_ex.3 \
+	libssh2_sftp_seek.3 \
+	libssh2_sftp_seek64.3 \
+	libssh2_sftp_setstat.3 \
+	libssh2_sftp_shutdown.3 \
+	libssh2_sftp_stat.3 \
+	libssh2_sftp_stat_ex.3 \
+	libssh2_sftp_statvfs.3 \
+	libssh2_sftp_symlink.3 \
+	libssh2_sftp_symlink_ex.3 \
+	libssh2_sftp_tell.3 \
+	libssh2_sftp_tell64.3 \
+	libssh2_sftp_unlink.3 \
+	libssh2_sftp_unlink_ex.3 \
+	libssh2_sftp_write.3 \
+	libssh2_trace.3 \
+	libssh2_trace_sethandler.3 \
+	libssh2_userauth_authenticated.3 \
+	libssh2_userauth_hostbased_fromfile.3 \
+	libssh2_userauth_hostbased_fromfile_ex.3 \
+	libssh2_userauth_keyboard_interactive.3 \
+	libssh2_userauth_keyboard_interactive_ex.3 \
+	libssh2_userauth_list.3 \
+	libssh2_userauth_password.3 \
+	libssh2_userauth_password_ex.3 \
+	libssh2_userauth_publickey.3 \
+	libssh2_userauth_publickey_fromfile.3 \
+	libssh2_userauth_publickey_fromfile_ex.3 \
+	libssh2_userauth_publickey_frommemory.3 \
+	libssh2_version.3
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign docs/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man3: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.3[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man3dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man3
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man3
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man3 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags-am uninstall uninstall-am uninstall-man \
+	uninstall-man3
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

node_modules/nodegit/vendor/libssh2/docs/Makefile.am

@@ -0,0 +1,177 @@
+# $Id: Makefile.am,v 1.37 2009/03/26 15:41:15 bagder Exp $
+
+EXTRA_DIST = template.3 BINDINGS INSTALL_AUTOTOOLS INSTALL_CMAKE HACKING TODO	\
+ AUTHORS CMakeLists.txt HACKING.CRYPTO SECURITY.md
+
+dist_man_MANS = \
+	libssh2_agent_connect.3 \
+	libssh2_agent_disconnect.3 \
+	libssh2_agent_free.3 \
+	libssh2_agent_get_identity.3 \
+	libssh2_agent_get_identity_path.3 \
+	libssh2_agent_init.3 \
+	libssh2_agent_list_identities.3 \
+	libssh2_agent_set_identity_path.3 \
+	libssh2_agent_userauth.3 \
+	libssh2_banner_set.3 \
+	libssh2_base64_decode.3 \
+	libssh2_channel_close.3 \
+	libssh2_channel_direct_tcpip.3 \
+	libssh2_channel_direct_tcpip_ex.3 \
+	libssh2_channel_eof.3 \
+	libssh2_channel_exec.3 \
+	libssh2_channel_flush.3 \
+	libssh2_channel_flush_ex.3 \
+	libssh2_channel_flush_stderr.3 \
+	libssh2_channel_forward_accept.3 \
+	libssh2_channel_forward_cancel.3 \
+	libssh2_channel_forward_listen.3 \
+	libssh2_channel_forward_listen_ex.3 \
+	libssh2_channel_free.3 \
+	libssh2_channel_get_exit_signal.3 \
+	libssh2_channel_get_exit_status.3 \
+	libssh2_channel_handle_extended_data.3 \
+	libssh2_channel_handle_extended_data2.3 \
+	libssh2_channel_ignore_extended_data.3 \
+	libssh2_channel_open_ex.3 \
+	libssh2_channel_open_session.3 \
+	libssh2_channel_process_startup.3 \
+	libssh2_channel_read.3 \
+	libssh2_channel_read_ex.3 \
+	libssh2_channel_read_stderr.3 \
+	libssh2_channel_receive_window_adjust.3 \
+	libssh2_channel_receive_window_adjust2.3 \
+	libssh2_channel_request_pty.3 \
+	libssh2_channel_request_pty_ex.3 \
+	libssh2_channel_request_pty_size.3 \
+	libssh2_channel_request_pty_size_ex.3 \
+	libssh2_channel_send_eof.3 \
+	libssh2_channel_set_blocking.3 \
+	libssh2_channel_setenv.3 \
+	libssh2_channel_setenv_ex.3 \
+	libssh2_channel_shell.3 \
+	libssh2_channel_subsystem.3 \
+	libssh2_channel_wait_closed.3 \
+	libssh2_channel_wait_eof.3 \
+	libssh2_channel_window_read.3 \
+	libssh2_channel_window_read_ex.3 \
+	libssh2_channel_window_write.3 \
+	libssh2_channel_window_write_ex.3 \
+	libssh2_channel_write.3 \
+	libssh2_channel_write_ex.3 \
+	libssh2_channel_write_stderr.3 \
+	libssh2_channel_x11_req.3 \
+	libssh2_channel_x11_req_ex.3 \
+	libssh2_exit.3 \
+	libssh2_free.3 \
+	libssh2_hostkey_hash.3 \
+	libssh2_init.3 \
+	libssh2_keepalive_config.3 \
+	libssh2_keepalive_send.3 \
+	libssh2_knownhost_add.3 \
+	libssh2_knownhost_addc.3 \
+	libssh2_knownhost_check.3 \
+	libssh2_knownhost_checkp.3 \
+	libssh2_knownhost_del.3 \
+	libssh2_knownhost_free.3 \
+	libssh2_knownhost_get.3 \
+	libssh2_knownhost_init.3 \
+	libssh2_knownhost_readfile.3 \
+	libssh2_knownhost_readline.3 \
+	libssh2_knownhost_writefile.3 \
+	libssh2_knownhost_writeline.3 \
+	libssh2_poll.3 \
+	libssh2_poll_channel_read.3 \
+	libssh2_publickey_add.3 \
+	libssh2_publickey_add_ex.3 \
+	libssh2_publickey_init.3 \
+	libssh2_publickey_list_fetch.3 \
+	libssh2_publickey_list_free.3 \
+	libssh2_publickey_remove.3 \
+	libssh2_publickey_remove_ex.3 \
+	libssh2_publickey_shutdown.3 \
+	libssh2_scp_recv.3 \
+	libssh2_scp_recv2.3 \
+	libssh2_scp_send.3 \
+	libssh2_scp_send64.3 \
+	libssh2_scp_send_ex.3 \
+	libssh2_session_abstract.3 \
+	libssh2_session_banner_get.3 \
+	libssh2_session_banner_set.3 \
+	libssh2_session_block_directions.3 \
+	libssh2_session_callback_set.3 \
+	libssh2_session_disconnect.3 \
+	libssh2_session_disconnect_ex.3 \
+	libssh2_session_flag.3 \
+	libssh2_session_free.3 \
+	libssh2_session_get_blocking.3 \
+	libssh2_session_get_timeout.3 \
+	libssh2_session_handshake.3 \
+	libssh2_session_hostkey.3 \
+	libssh2_session_init.3 \
+	libssh2_session_init_ex.3 \
+	libssh2_session_last_errno.3 \
+	libssh2_session_last_error.3 \
+	libssh2_session_set_last_error.3 \
+	libssh2_session_method_pref.3 \
+	libssh2_session_methods.3 \
+	libssh2_session_set_blocking.3 \
+	libssh2_session_set_timeout.3 \
+	libssh2_session_startup.3 \
+	libssh2_session_supported_algs.3 \
+	libssh2_sftp_close.3 \
+	libssh2_sftp_close_handle.3 \
+	libssh2_sftp_closedir.3 \
+	libssh2_sftp_fsetstat.3 \
+	libssh2_sftp_fstat.3 \
+	libssh2_sftp_fstat_ex.3 \
+	libssh2_sftp_fstatvfs.3 \
+	libssh2_sftp_fsync.3 \
+	libssh2_sftp_get_channel.3 \
+	libssh2_sftp_init.3 \
+	libssh2_sftp_last_error.3 \
+	libssh2_sftp_lstat.3 \
+	libssh2_sftp_mkdir.3 \
+	libssh2_sftp_mkdir_ex.3 \
+	libssh2_sftp_open.3 \
+	libssh2_sftp_open_ex.3 \
+	libssh2_sftp_opendir.3 \
+	libssh2_sftp_read.3 \
+	libssh2_sftp_readdir.3 \
+	libssh2_sftp_readdir_ex.3 \
+	libssh2_sftp_readlink.3 \
+	libssh2_sftp_realpath.3 \
+	libssh2_sftp_rename.3 \
+	libssh2_sftp_rename_ex.3 \
+	libssh2_sftp_rewind.3 \
+	libssh2_sftp_rmdir.3 \
+	libssh2_sftp_rmdir_ex.3 \
+	libssh2_sftp_seek.3 \
+	libssh2_sftp_seek64.3 \
+	libssh2_sftp_setstat.3 \
+	libssh2_sftp_shutdown.3 \
+	libssh2_sftp_stat.3 \
+	libssh2_sftp_stat_ex.3 \
+	libssh2_sftp_statvfs.3 \
+	libssh2_sftp_symlink.3 \
+	libssh2_sftp_symlink_ex.3 \
+	libssh2_sftp_tell.3 \
+	libssh2_sftp_tell64.3 \
+	libssh2_sftp_unlink.3 \
+	libssh2_sftp_unlink_ex.3 \
+	libssh2_sftp_write.3 \
+	libssh2_trace.3 \
+	libssh2_trace_sethandler.3 \
+	libssh2_userauth_authenticated.3 \
+	libssh2_userauth_hostbased_fromfile.3 \
+	libssh2_userauth_hostbased_fromfile_ex.3 \
+	libssh2_userauth_keyboard_interactive.3 \
+	libssh2_userauth_keyboard_interactive_ex.3 \
+	libssh2_userauth_list.3 \
+	libssh2_userauth_password.3 \
+	libssh2_userauth_password_ex.3 \
+	libssh2_userauth_publickey.3 \
+	libssh2_userauth_publickey_fromfile.3 \
+	libssh2_userauth_publickey_fromfile_ex.3 \
+	libssh2_userauth_publickey_frommemory.3 \
+	libssh2_version.3

node_modules/nodegit/vendor/libssh2/docs/Makefile.in

@@ -0,0 +1,729 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# $Id: Makefile.am,v 1.37 2009/03/26 15:41:15 bagder Exp $
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = docs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/libssh2_config.h \
+	$(top_builddir)/example/libssh2_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man3dir = $(mandir)/man3
+am__installdirs = "$(DESTDIR)$(man3dir)"
+NROFF = nroff
+MANS = $(dist_man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in AUTHORS TODO
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+HAVE_LIBBCRYPT = @HAVE_LIBBCRYPT@
+HAVE_LIBCRYPT32 = @HAVE_LIBCRYPT32@
+HAVE_LIBGCRYPT = @HAVE_LIBGCRYPT@
+HAVE_LIBMBEDCRYPTO = @HAVE_LIBMBEDCRYPTO@
+HAVE_LIBSSL = @HAVE_LIBSSL@
+HAVE_LIBZ = @HAVE_LIBZ@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBBCRYPT = @LIBBCRYPT@
+LIBBCRYPT_PREFIX = @LIBBCRYPT_PREFIX@
+LIBCRYPT32 = @LIBCRYPT32@
+LIBCRYPT32_PREFIX = @LIBCRYPT32_PREFIX@
+LIBGCRYPT = @LIBGCRYPT@
+LIBGCRYPT_PREFIX = @LIBGCRYPT_PREFIX@
+LIBMBEDCRYPTO = @LIBMBEDCRYPTO@
+LIBMBEDCRYPTO_PREFIX = @LIBMBEDCRYPTO_PREFIX@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSREQUIRED = @LIBSREQUIRED@
+LIBSSH2VER = @LIBSSH2VER@
+LIBSSL = @LIBSSL@
+LIBSSL_PREFIX = @LIBSSL_PREFIX@
+LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
+LIBZ_PREFIX = @LIBZ_PREFIX@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBBCRYPT = @LTLIBBCRYPT@
+LTLIBCRYPT32 = @LTLIBCRYPT32@
+LTLIBGCRYPT = @LTLIBGCRYPT@
+LTLIBMBEDCRYPTO = @LTLIBMBEDCRYPTO@
+LTLIBOBJS = @LTLIBOBJS@
+LTLIBSSL = @LTLIBSSL@
+LTLIBZ = @LTLIBZ@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSHD = @SSHD@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = template.3 BINDINGS INSTALL_AUTOTOOLS INSTALL_CMAKE HACKING TODO	\
+ AUTHORS CMakeLists.txt HACKING.CRYPTO SECURITY.md
+
+dist_man_MANS = \
+	libssh2_agent_connect.3 \
+	libssh2_agent_disconnect.3 \
+	libssh2_agent_free.3 \
+	libssh2_agent_get_identity.3 \
+	libssh2_agent_get_identity_path.3 \
+	libssh2_agent_init.3 \
+	libssh2_agent_list_identities.3 \
+	libssh2_agent_set_identity_path.3 \
+	libssh2_agent_userauth.3 \
+	libssh2_banner_set.3 \
+	libssh2_base64_decode.3 \
+	libssh2_channel_close.3 \
+	libssh2_channel_direct_tcpip.3 \
+	libssh2_channel_direct_tcpip_ex.3 \
+	libssh2_channel_eof.3 \
+	libssh2_channel_exec.3 \
+	libssh2_channel_flush.3 \
+	libssh2_channel_flush_ex.3 \
+	libssh2_channel_flush_stderr.3 \
+	libssh2_channel_forward_accept.3 \
+	libssh2_channel_forward_cancel.3 \
+	libssh2_channel_forward_listen.3 \
+	libssh2_channel_forward_listen_ex.3 \
+	libssh2_channel_free.3 \
+	libssh2_channel_get_exit_signal.3 \
+	libssh2_channel_get_exit_status.3 \
+	libssh2_channel_handle_extended_data.3 \
+	libssh2_channel_handle_extended_data2.3 \
+	libssh2_channel_ignore_extended_data.3 \
+	libssh2_channel_open_ex.3 \
+	libssh2_channel_open_session.3 \
+	libssh2_channel_process_startup.3 \
+	libssh2_channel_read.3 \
+	libssh2_channel_read_ex.3 \
+	libssh2_channel_read_stderr.3 \
+	libssh2_channel_receive_window_adjust.3 \
+	libssh2_channel_receive_window_adjust2.3 \
+	libssh2_channel_request_pty.3 \
+	libssh2_channel_request_pty_ex.3 \
+	libssh2_channel_request_pty_size.3 \
+	libssh2_channel_request_pty_size_ex.3 \
+	libssh2_channel_send_eof.3 \
+	libssh2_channel_set_blocking.3 \
+	libssh2_channel_setenv.3 \
+	libssh2_channel_setenv_ex.3 \
+	libssh2_channel_shell.3 \
+	libssh2_channel_subsystem.3 \
+	libssh2_channel_wait_closed.3 \
+	libssh2_channel_wait_eof.3 \
+	libssh2_channel_window_read.3 \
+	libssh2_channel_window_read_ex.3 \
+	libssh2_channel_window_write.3 \
+	libssh2_channel_window_write_ex.3 \
+	libssh2_channel_write.3 \
+	libssh2_channel_write_ex.3 \
+	libssh2_channel_write_stderr.3 \
+	libssh2_channel_x11_req.3 \
+	libssh2_channel_x11_req_ex.3 \
+	libssh2_exit.3 \
+	libssh2_free.3 \
+	libssh2_hostkey_hash.3 \
+	libssh2_init.3 \
+	libssh2_keepalive_config.3 \
+	libssh2_keepalive_send.3 \
+	libssh2_knownhost_add.3 \
+	libssh2_knownhost_addc.3 \
+	libssh2_knownhost_check.3 \
+	libssh2_knownhost_checkp.3 \
+	libssh2_knownhost_del.3 \
+	libssh2_knownhost_free.3 \
+	libssh2_knownhost_get.3 \
+	libssh2_knownhost_init.3 \
+	libssh2_knownhost_readfile.3 \
+	libssh2_knownhost_readline.3 \
+	libssh2_knownhost_writefile.3 \
+	libssh2_knownhost_writeline.3 \
+	libssh2_poll.3 \
+	libssh2_poll_channel_read.3 \
+	libssh2_publickey_add.3 \
+	libssh2_publickey_add_ex.3 \
+	libssh2_publickey_init.3 \
+	libssh2_publickey_list_fetch.3 \
+	libssh2_publickey_list_free.3 \
+	libssh2_publickey_remove.3 \
+	libssh2_publickey_remove_ex.3 \
+	libssh2_publickey_shutdown.3 \
+	libssh2_scp_recv.3 \
+	libssh2_scp_recv2.3 \
+	libssh2_scp_send.3 \
+	libssh2_scp_send64.3 \
+	libssh2_scp_send_ex.3 \
+	libssh2_session_abstract.3 \
+	libssh2_session_banner_get.3 \
+	libssh2_session_banner_set.3 \
+	libssh2_session_block_directions.3 \
+	libssh2_session_callback_set.3 \
+	libssh2_session_disconnect.3 \
+	libssh2_session_disconnect_ex.3 \
+	libssh2_session_flag.3 \
+	libssh2_session_free.3 \
+	libssh2_session_get_blocking.3 \
+	libssh2_session_get_timeout.3 \
+	libssh2_session_handshake.3 \
+	libssh2_session_hostkey.3 \
+	libssh2_session_init.3 \
+	libssh2_session_init_ex.3 \
+	libssh2_session_last_errno.3 \
+	libssh2_session_last_error.3 \
+	libssh2_session_set_last_error.3 \
+	libssh2_session_method_pref.3 \
+	libssh2_session_methods.3 \
+	libssh2_session_set_blocking.3 \
+	libssh2_session_set_timeout.3 \
+	libssh2_session_startup.3 \
+	libssh2_session_supported_algs.3 \
+	libssh2_sftp_close.3 \
+	libssh2_sftp_close_handle.3 \
+	libssh2_sftp_closedir.3 \
+	libssh2_sftp_fsetstat.3 \
+	libssh2_sftp_fstat.3 \
+	libssh2_sftp_fstat_ex.3 \
+	libssh2_sftp_fstatvfs.3 \
+	libssh2_sftp_fsync.3 \
+	libssh2_sftp_get_channel.3 \
+	libssh2_sftp_init.3 \
+	libssh2_sftp_last_error.3 \
+	libssh2_sftp_lstat.3 \
+	libssh2_sftp_mkdir.3 \
+	libssh2_sftp_mkdir_ex.3 \
+	libssh2_sftp_open.3 \
+	libssh2_sftp_open_ex.3 \
+	libssh2_sftp_opendir.3 \
+	libssh2_sftp_read.3 \
+	libssh2_sftp_readdir.3 \
+	libssh2_sftp_readdir_ex.3 \
+	libssh2_sftp_readlink.3 \
+	libssh2_sftp_realpath.3 \
+	libssh2_sftp_rename.3 \
+	libssh2_sftp_rename_ex.3 \
+	libssh2_sftp_rewind.3 \
+	libssh2_sftp_rmdir.3 \
+	libssh2_sftp_rmdir_ex.3 \
+	libssh2_sftp_seek.3 \
+	libssh2_sftp_seek64.3 \
+	libssh2_sftp_setstat.3 \
+	libssh2_sftp_shutdown.3 \
+	libssh2_sftp_stat.3 \
+	libssh2_sftp_stat_ex.3 \
+	libssh2_sftp_statvfs.3 \
+	libssh2_sftp_symlink.3 \
+	libssh2_sftp_symlink_ex.3 \
+	libssh2_sftp_tell.3 \
+	libssh2_sftp_tell64.3 \
+	libssh2_sftp_unlink.3 \
+	libssh2_sftp_unlink_ex.3 \
+	libssh2_sftp_write.3 \
+	libssh2_trace.3 \
+	libssh2_trace_sethandler.3 \
+	libssh2_userauth_authenticated.3 \
+	libssh2_userauth_hostbased_fromfile.3 \
+	libssh2_userauth_hostbased_fromfile_ex.3 \
+	libssh2_userauth_keyboard_interactive.3 \
+	libssh2_userauth_keyboard_interactive_ex.3 \
+	libssh2_userauth_list.3 \
+	libssh2_userauth_password.3 \
+	libssh2_userauth_password_ex.3 \
+	libssh2_userauth_publickey.3 \
+	libssh2_userauth_publickey_fromfile.3 \
+	libssh2_userauth_publickey_fromfile_ex.3 \
+	libssh2_userauth_publickey_frommemory.3 \
+	libssh2_version.3
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign docs/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man3: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.3[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man3dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man3
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man3
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man3 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags-am uninstall uninstall-am uninstall-man \
+	uninstall-man3
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

node_modules/nodegit/vendor/libssh2/docs/TODO

@@ -0,0 +1,174 @@
+Things TODO
+===========
+
+* Fix the numerous malloc+copy operations for sending data, see "Buffering
+  Improvements" below for details
+
+* make sure the windowing code adapts better to slow situations so that it
+  doesn't then use as much memory as today. Possibly by an app-controllable
+  "Window mode"?
+
+* Decrease the number of mallocs. Everywhere. Will get easier once the
+  buffering improvements have been done.
+
+* Use SO_NOSIGPIPE for Mac OS/BSD systems where MSG_NOSIGNAL doesn't
+  exist/work
+
+* Extend the test suite to actually test lots of aspects of libssh2
+
+* Fix all compiler warnings (some can't be done without API changes)
+
+* Expose error messages sent by the server
+
+* select() is troublesome with libssh2 when using multiple channels over
+  the same session. See "New Transport API" below for more details.
+
+At next SONAME bump
+===================
+
+* stop using #defined macros as part of the official API. The macros should
+  either be turned into real functions or discarded from the API.
+
+* fix the parts of the API where object pointers and function pointers are
+  mixed like libssh2_session_callback_set()
+
+* remove the following functions from the API/ABI
+
+  libssh2_base64_decode()
+  libssh2_session_flag()
+  libssh2_channel_handle_extended_data()
+  libssh2_channel_receive_window_adjust()
+  libssh2_poll()
+  libssh2_poll_channel_read()
+  libssh2_session_startup() (libssh2_session_handshake() is the replacement)
+  libssh2_banner_set() (libssh2_session_banner_set() is the repacement)
+
+* Rename a few function:
+
+  libssh2_hostkey_hash => libssh2_session_hostkey_hash
+  libssh2_banner_set => libssh2_session_banner_set
+
+* change 'int' to 'libssh2_socket_t' in the public API for sockets.
+
+* Use 'size_t' for string lengths in all functions.
+
+* Add a comment field to struct libssh2_knownhost.
+
+* remove the existing libssh2_knownhost_add() function and rename
+  libssh2_knownhost_addc to become the new libssh2_knownhost_add instead
+
+* remove the existing libssh2_scp_send_ex() function and rename
+  libssh2_scp_send64 to become the new libssh2_scp_send instead.
+
+* remove the existing libssh2_knownhost_check() functin and rename
+  libssh2_knownhost_checkp() to become the new libssh2_knownhost_check instead
+
+Buffering Improvements
+======================
+
+transport_write
+
+  - If this function gets called with a total packet size that is larger than
+  32K, it should create more than one SSH packet so that it keeps the largest
+  one below 32K
+
+sftp_write
+
+  - should not copy/allocate anything for the data, only create a header chunk
+  and pass on the payload data to channel_write "pointed to"
+
+New Transport API
+=================
+
+THE PROBLEM
+
+The problem in a nutshell is that when an application opens up multiple
+channels over a single session, those are all using the same socket. If the
+application is then using select() to wait for traffic (like any sensible app
+does) and wants to act on the data when select() tells there is something to
+for example read, what does an application do?
+
+With our current API, you have to loop over all the channels and read from
+them to see if they have data. This effectively makes blocking reads
+impossible. If the app has many channels in a setup like this, it even becomes
+slow. (The original API had the libssh2_poll_channel_read() and libssh2_poll()
+to somewhat overcome this hurdle, but they too have pretty much the same
+problems plus a few others.)
+
+Traffic in the other direction is similarly limited: the app has to try
+sending to all channels, even though some of them may very well not accept any
+data at that point.
+
+A SOLUTION
+
+I suggest we introduce two new helper functions:
+
+ libssh2_transport_read()
+
+ - Read "a bunch" of data from the given socket and returns information to the
+   app about what channels that are now readable (ie they will not block when
+   read from). The function can be called over and over and it will repeatedly
+   return info about what channels that are readable at that moment.
+
+ libssh2_transport_write()
+
+ - Returns information about what channels that are writable, in the sense
+   that they have windows set from the remote side that allows data to get
+   sent. Writing to one of those channels will not block. Of course, the
+   underlying socket may only accept a certain amount of data, so at the first
+   short return, nothing more should be attempted to get sent until select()
+   (or equivalent) has been used on the master socket again.
+
+I haven't yet figured out a sensible API for how these functions should return
+that info, but if we agree on the general principles I guess we can work that
+out.
+
+VOLUNTARY
+
+  I wanted to mention that these two helper functions would not be mandatory
+  in any way. They would just be there for those who want them, and existing
+  programs can remain using the old functions only if they prefer to.
+
+New SFTP API
+============
+
+PURPOSE
+
+ Provide API functions that explicitly tells at once that a (full) SFTP file
+ transfer is wanted, to allow libssh2 to leverage on that knowledge to speed
+ up things internally. It can for example do read ahead, buffer writes (merge
+ small writes into larger chunks), better tune the SSH window and more. This
+ sort of API is already provided for SCP transfers.
+
+API
+
+ New functions:
+
+    LIBSSH2_SFTP_HANDLE *libssh2_sftp_send(SFTP_SESSION *sftp,
+                                           uint64_t filesize,
+                                           char *remote_path,
+                                           size_t remote_path_len,
+                                           long mode);
+
+ Tell libssh2 that a local file with a given size is about to get sent to
+ the SFTP server.
+
+    LIBSSH2_SFTP_HANDLE *libssh2_sftp_recv();
+
+ Tell libssh2 that a remote file is requested to get downloaded from the SFTP
+ server.
+
+ Only the setup of the file transfer is different from an application's point
+ of view. Depending on direction of the transfer(s), the following already
+ existing functions should then be used until the transfer is complete:
+
+ libssh2_sftp_read()
+ libssh2_sftp_write()
+
+HOW TO USE
+
+ 1. Setup the transfer using one of the two new functions.
+
+ 2. Loop through the reading or writing of data.
+
+ 3. Cleanup the transfer

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_connect.3

@@ -0,0 +1,23 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_connect 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_connect - connect to an ssh-agent
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_agent_connect(LIBSSH2_AGENT *agent);
+.SH DESCRIPTION
+Connect to an ssh-agent running on the system.
+
+Call \fBlibssh2_agent_disconnect(3)\fP to close the connection after
+you're doing using it.
+.SH RETURN VALUE
+Returns 0 if succeeded, or a negative value for error.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_init(3)
+.BR libssh2_agent_disconnect(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_disconnect.3

@@ -0,0 +1,20 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_disconnect 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_disconnect - close a connection to an ssh-agent
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_agent_disconnect(LIBSSH2_AGENT *agent);
+.SH DESCRIPTION
+Close a connection to an ssh-agent.
+
+.SH RETURN VALUE
+Returns 0 if succeeded, or a negative value for error.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_connect(3)
+.BR libssh2_agent_free(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_free.3

@@ -0,0 +1,20 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_free 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_free - free an ssh-agent handle
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void libssh2_agent_free(LIBSSH2_AGENT *agent);
+.SH DESCRIPTION
+Free an ssh-agent handle.  This function also frees the internal
+collection of public keys.
+.SH RETURN VALUE
+None.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_init(3)
+.BR libssh2_agent_disconnect(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_get_identity.3

@@ -0,0 +1,34 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_get_identity 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_get_identity - get a public key off the collection of public keys managed by ssh-agent
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_agent_get_identity(LIBSSH2_AGENT *agent,
+                               struct libssh2_agent_publickey **store,
+                               struct libssh2_agent_publickey *prev);
+.SH DESCRIPTION
+\fIlibssh2_agent_get_identity(3)\fP allows an application to iterate
+over all public keys in the collection managed by ssh-agent.
+
+\fIstore\fP should point to a pointer that gets filled in to point to the
+public key data.
+
+\fIprev\fP is a pointer to a previous 'struct libssh2_agent_publickey'
+as returned by a previous invoke of this function, or NULL to get the
+first entry in the internal collection.
+.SH RETURN VALUE
+Returns 0 if everything is fine and information about a host was stored in
+the \fIstore\fP struct.
+
+Returns 1 if it reached the end of public keys.
+
+Returns negative values for error
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_list_identities(3)
+.BR libssh2_agent_userauth(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_get_identity_path.3

@@ -0,0 +1,22 @@
+.\"
+.\" Copyright (c) 2019 by Will Cosgrove
+.\"
+.TH libssh2_agent_get_identity_path 3 "6 Mar 2019" "libssh2 1.9" "libssh2 manual"
+.SH NAME
+libssh2_agent_get_identity_path - gets the custom ssh-agent socket path
+.SH SYNOPSIS
+#include <libssh2.h>
+
+const char *
+libssh2_agent_get_identity_path(LIBSSH2_AGENT *agent);
+.SH DESCRIPTION
+Returns the custom agent identity socket path if set using libssh2_agent_set_identity_path()
+
+.SH RETURN VALUE
+Returns the socket path on disk.
+.SH AVAILABILITY
+Added in libssh2 1.9
+.SH SEE ALSO
+.BR libssh2_agent_init(3)
+.BR libssh2_agent_set_identity_path(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_init.3

@@ -0,0 +1,26 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_init 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_init - init an ssh-agent handle
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_AGENT *libssh2_agent_init(LIBSSH2_SESSION *session);
+.SH DESCRIPTION
+Init an ssh-agent handle. Returns the handle to an internal
+representation of an ssh-agent connection.  After the successful
+initialization, an application can call \fBlibssh2_agent_connect(3)\fP
+to connect to a running ssh-agent.
+
+Call \fBlibssh2_agent_free(3)\fP to free the handle again after you're
+doing using it.
+.SH RETURN VALUE
+Returns a handle pointer or NULL if something went wrong. The returned handle
+is used as input to all other ssh-agent related functions libssh2 provides.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_connect(3)
+.BR libssh2_agent_free(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_list_identities.3

@@ -0,0 +1,24 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_list_identities 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_list_identities - request an ssh-agent to list of public keys.
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_agent_list_identities(LIBSSH2_AGENT *agent);
+.SH DESCRIPTION
+Request an ssh-agent to list of public keys, and stores them in the
+internal collection of the handle.  Call
+\fIlibssh2_agent_get_identity(3)\fP to get a public key off the
+collection.
+
+.SH RETURN VALUE
+Returns 0 if succeeded, or a negative value for error.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_connect(3)
+.BR libssh2_agent_get_identity(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_set_identity_path.3

@@ -0,0 +1,22 @@
+.\"
+.\" Copyright (c) 2019 by Will Cosgrove
+.\"
+.TH libssh2_agent_set_identity_path 3 "6 Mar 2019" "libssh2 1.9" "libssh2 manual"
+.SH NAME
+libssh2_agent_set_identity_path - set an ssh-agent socket path on disk
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void
+libssh2_agent_set_identity_path(LIBSSH2_AGENT *agent, const char *path);
+.SH DESCRIPTION
+Allows a custom agent identity socket path instead of the default SSH_AUTH_SOCK env value
+
+.SH RETURN VALUE
+Returns void
+.SH AVAILABILITY
+Added in libssh2 1.9
+.SH SEE ALSO
+.BR libssh2_agent_init(3)
+.BR libssh2_agent_get_identity_path(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_agent_userauth.3

@@ -0,0 +1,29 @@
+.\"
+.\" Copyright (c) 2009 by Daiki Ueno
+.\"
+.TH libssh2_agent_userauth 3 "23 Dec 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_agent_userauth - authenticate a session with a public key, with the help of ssh-agent
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_agent_userauth(LIBSSH2_AGENT *agent,
+                           const char *username,
+                           struct libssh2_agent_publickey *identity);
+.SH DESCRIPTION
+\fIagent\fP - ssh-agent handle as returned by 
+.BR libssh2_agent_init(3)
+
+\fIusername\fP - Remote user name to authenticate as.
+
+\fIidentity\fP - Public key to authenticate with, as returned by 
+.BR libssh2_agent_get_identity(3)
+
+Attempt public key authentication with the help of ssh-agent.
+.SH RETURN VALUE
+Returns 0 if succeeded, or a negative value for error.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_agent_init(3)
+.BR libssh2_agent_get_identity(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_banner_set.3

@@ -0,0 +1,32 @@
+.TH libssh2_banner_set 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_banner_set - set the SSH protocol banner for the local client
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_banner_set(LIBSSH2_SESSION *session, const char *banner);
+
+.SH DESCRIPTION
+This function is \fBDEPRECATED\fP. Use \fIlibssh2_session_banner_set(3)\fP
+instead!
+
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIbanner\fP - A pointer to a user defined banner
+
+Set the banner that will be sent to the remote host when the SSH session is 
+started with 
+.BR libssh2_session_handshake(3)
+  This is optional; a banner corresponding to the protocol and libssh2 version will be sent by default.
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH AVAILABILITY
+Marked as deprecated since 1.4.0
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+.SH SEE ALSO
+.BR libssh2_session_handshake(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_base64_decode.3

@@ -0,0 +1,25 @@
+.TH libssh2_base64_decode 3 "23 Dec 2008" "libssh2 1.0" "libssh2 manual"
+.SH NAME
+libssh2_base64_decode - decode a base64 encoded string
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_base64_decode(LIBSSH2_SESSION *session, char **dest,
+                          unsigned int *dest_len, const char *src,
+                          unsigned int src_len);
+.SH DESCRIPTION
+This function is deemed DEPRECATED and will be removed from libssh2 in a
+future version. Don't use it!
+
+Decode a base64 chunk and store it into a newly allocated buffer. 'dest_len'
+will be set to hold the length of the returned buffer that '*dest' will point
+to.
+
+The returned buffer is allocated by this function, but it is not clear how to
+free that memory!
+.SH BUGS
+The memory that *dest points to is allocated by the malloc function libssh2
+uses, but there's no way for an application to free this data in a safe and
+reliable way!
+.SH RETURN VALUE
+0 if successful, \-1 if any error occurred.

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_close.3

@@ -0,0 +1,29 @@
+.TH libssh2_channel_close 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_close - close a channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_close(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+\fIchannel\fP - active channel stream to set closed status on.
+
+Close an active data channel. In practice this means sending an SSH_MSG_CLOSE 
+packet to the remote host which serves as instruction that no further data 
+will be sent to it. The remote host may still send data back until it sends 
+its own close message in response. To wait for the remote end to close its 
+connection as well, follow this command with 
+.BR libssh2_channel_wait_closed(3)
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+.SH ERRORS
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_direct_tcpip.3

@@ -0,0 +1,18 @@
+.TH libssh2_channel_direct_tcpip 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_direct_tcpip - convenience macro for \fIlibssh2_channel_direct_tcpip_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_channel_direct_tcpip(LIBSSH2_SESSION *session, const char *host, int port);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_direct_tcpip_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_direct_tcpip_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_direct_tcpip_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_direct_tcpip_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_direct_tcpip_ex.3

@@ -0,0 +1,35 @@
+.TH libssh2_channel_direct_tcpip_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_direct_tcpip_ex - Tunnel a TCP connection through an SSH session
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL * 
+libssh2_channel_direct_tcpip_ex(LIBSSH2_SESSION *session, const char *host, int port, const char *shost, int sport);
+
+LIBSSH2_CHANNEL * 
+libssh2_channel_direct_tcpip(LIBSSH2_SESSION *session, const char *host, int port);
+
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIhost\fP - Third party host to connect to using the SSH host as a proxy.
+
+\fIport\fP - Port on third party host to connect to.
+
+\fIshost\fP - Host to tell the SSH server the connection originated on.
+
+\fIsport\fP - Port to tell the SSH server the connection originated from.
+
+Tunnel a TCP/IP connection through the SSH transport via the remote host to 
+a third party. Communication from the client to the SSH server remains 
+encrypted, communication from the server to the 3rd party host travels 
+in cleartext.
+
+.SH RETURN VALUE
+Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_eof.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_eof 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_eof - check a channel's EOF status
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_eof(LIBSSH2_CHANNEL *channel);
+.SH DESCRIPTION
+\fIchannel\fP - active channel stream to set closed status on.
+
+Check if the remote host has sent an EOF status for the selected stream.
+.SH RETURN VALUE
+Returns 1 if the remote host has sent EOF, otherwise 0. Negative on
+failure.
+.SH SEE ALSO
+.BR libssh2_channel_close(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_exec.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_exec 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_exec - convenience macro for \fIlibssh2_channel_process_startup(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_exec(LIBSSH2_CHANNEL *channel, const char *command);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_process_startup(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_process_startup(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_process_startup(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_process_startup(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_flush.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_flush 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_flush - convenience macro for \fIlibssh2_channel_flush_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_flush(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_flush_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_flush_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_flush_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_flush_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_flush_ex.3

@@ -0,0 +1,32 @@
+.TH libssh2_channel_flush_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_flush_ex - flush a channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_flush_ex(LIBSSH2_CHANNEL *channel, int streamid);
+
+int 
+libssh2_channel_flush(LIBSSH2_CHANNEL *channel);
+
+int 
+libssh2_channel_flush_stderr(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+\fIchannel\fP - Active channel stream to flush.
+
+\fIstreamid\fP - Specific substream number to flush. Groups of substreams may 
+be flushed by passing on of the following Constants.
+.br
+\fBLIBSSH2_CHANNEL_FLUSH_EXTENDED_DATA\fP: Flush all extended data substreams
+.br
+\fBLIBSSH2_CHANNEL_FLUSH_ALL\fP: Flush all substreams
+
+Flush the read buffer for a given channel instance. Individual substreams may 
+be flushed by number or using one of the provided macros.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_flush_stderr.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_flush_stderr 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_flush_stderr - convenience macro for \fIlibssh2_channel_flush_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_flush_stderr(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_flush_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_flush_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_flush_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_flush_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_forward_accept.3

@@ -0,0 +1,20 @@
+.TH libssh2_channel_forward_accept 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_forward_accept - accept a queued connection
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_channel_forward_accept(LIBSSH2_LISTENER *listener);
+
+.SH DESCRIPTION
+\fIlistener\fP is a forwarding listener instance as returned by
+\fBlibssh2_channel_forward_listen_ex(3)\fP.
+.SH RETURN VALUE
+A newly allocated channel instance or NULL on failure.
+.SH ERRORS
+When this function returns NULL use \fIlibssh2_session_last_errno(3)\fP to
+extract the error code. If that code is \fILIBSSH2_ERROR_EAGAIN\fP, the
+session is set to do non-blocking I/O but the call would block.
+.SH SEE ALSO
+.BR libssh2_channel_forward_listen_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_forward_cancel.3

@@ -0,0 +1,27 @@
+.TH libssh2_channel_forward_cancel 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_forward_cancel - cancel a forwarded TCP port
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_forward_cancel(LIBSSH2_LISTENER *listener);
+
+.SH DESCRIPTION
+\fIlistener\fP - Forwarding listener instance as returned by 
+.BR libssh2_channel_forward_listen_ex(3)
+
+Instruct the remote host to stop listening for new connections on a previously requested host/port.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+.SH SEE ALSO
+.BR libssh2_channel_forward_listen_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_forward_listen.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_forward_listen 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_forward_listen - convenience macro for \fIlibssh2_channel_forward_listen_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_forward_listen(LIBSSH2_SESSION *session, int port);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_forward_listen_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_forward_listen_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_forward_listen_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_forward_listen_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_forward_listen_ex.3

@@ -0,0 +1,46 @@
+.TH libssh2_channel_forward_listen_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_forward_listen_ex - listen to inbound connections
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_LISTENER * 
+libssh2_channel_forward_listen_ex(LIBSSH2_SESSION *session, char *host, int port, int *bound_port, int queue_maxsize);
+
+LIBSSH2_LISTENER * 
+libssh2_channel_forward_listen(LIBSSH2_SESSION *session, int port);
+
+.SH DESCRIPTION
+Instruct the remote SSH server to begin listening for inbound TCP/IP
+connections. New connections will be queued by the library until accepted by
+\fIlibssh2_channel_forward_accept(3)\fP.
+
+\fIsession\fP - instance as returned by libssh2_session_init(). 
+
+\fIhost\fP - specific address to bind to on the remote host. Binding to
+0.0.0.0 (default when NULL is passed) will bind to all available addresses.
+
+\fIport\fP - port to bind to on the remote host. When 0 is passed, the remote
+host will select the first available dynamic port.
+
+\fIbound_port\fP - Populated with the actual port bound on the remote
+host. Useful when requesting dynamic port numbers.
+
+\fIqueue_maxsize\fP - Maximum number of pending connections to queue before
+rejecting further attempts.
+
+\fIlibssh2_channel_forward_listen(3)\fP is a macro.
+.SH RETURN VALUE
+A newly allocated LIBSSH2_LISTENER instance or NULL on failure.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP - An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_PROTO\fP - An invalid SSH protocol response was received on the socket.
+
+\fILIBSSH2_ERROR_REQUEST_DENIED\fP - The remote server refused the request.
+
+\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would block.
+.SH SEE ALSO
+.BR libssh2_channel_forward_accept(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_free.3

@@ -0,0 +1,25 @@
+.TH libssh2_channel_free 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_free - free all resources associated with a channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_free(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+\fIchannel\fP - Channel stream to free.
+
+Release all resources associated with a channel stream. If the channel has 
+not yet been closed with 
+.BR libssh2_channel_close(3)
+, it will be called automatically so that the remote end may know that it 
+can safely free its own resources.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+.SH SEE ALSO
+.BR libssh2_channel_close(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_get_exit_signal.3

@@ -0,0 +1,34 @@
+.TH libssh2_channel_get_exit_signal 3 "4 Oct 2010" "libssh2 1.2.8" "libssh2 manual"
+.SH NAME
+libssh2_channel_get_exit_signal - get the remote exit signal
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_get_exit_signal(LIBSSH2_CHANNEL *channel, char **exitsignal, size_t *exitsignal_len, char **errmsg, size_t *errmsg_len, char **langtag, size_t *langtag_len);
+
+.SH DESCRIPTION
+\fIchannel\fP - Closed channel stream to retrieve exit signal from.
+
+\fIexitsignal\fP - If not NULL, is populated by reference with the exit signal
+(without leading "SIG"). Note that the string is stored in a newly allocated
+buffer. If the remote program exited cleanly, the referenced string pointer
+will be set to NULL. 
+
+\fIexitsignal_len\fP - If not NULL, is populated by reference with the length
+of exitsignal. 
+
+\fIerrmsg\fP - If not NULL, is populated by reference with the error message
+(if provided by remote server, if not it will be set to NULL). Note that the
+string is stored in a newly allocated buffer.
+
+\fIerrmsg_len\fP - If not NULL, is populated by reference with the length of errmsg.
+
+\fIlangtag\fP - If not NULL, is populated by reference with the language tag 
+(if provided by remote server, if not it will be set to NULL). Note that the
+string is stored in a newly allocated buffer.
+
+\fIlangtag_len\fP - If not NULL, is populated by reference with the length of langtag.
+
+.SH RETURN VALUE
+Numeric error code corresponding to the the Error Code constants.

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_get_exit_status.3

@@ -0,0 +1,18 @@
+.TH libssh2_channel_get_exit_status 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_get_exit_status - get the remote exit code
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_get_exit_status(LIBSSH2_CHANNEL* channel)
+
+.SH DESCRIPTION
+\fIchannel\fP - Closed channel stream to retrieve exit status from.
+
+Returns the exit code raised by the process running on the remote host at 
+the other end of the named channel. Note that the exit status may not be 
+available if the remote end has not yet set its status to closed.
+
+.SH RETURN VALUE
+Returns 0 on failure, otherwise the \fIExit Status\fP reported by remote host

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_handle_extended_data.3

@@ -0,0 +1,35 @@
+.TH libssh2_channel_handle_extended_data 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_handle_extended_data - set extended data handling mode
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void 
+libssh2_channel_handle_extended_data(LIBSSH2_CHANNEL *channel, int ignore_mode);
+
+.SH DESCRIPTION
+This function is deprecated. Use the
+\fIlibssh2_channel_handle_extended_data2(3)\fP function instead!
+
+\fIchannel\fP - Active channel stream to change extended data handling on.
+
+\fIignore_mode\fP - One of the three LIBSSH2_CHANNEL_EXTENDED_DATA_* Constants.
+.br
+\fBLIBSSH2_CHANNEL_EXTENDED_DATA_NORMAL\fP: Queue extended data for eventual 
+reading
+.br
+\fBLIBSSH2_CHANNEL_EXTENDED_DATA_MERGE\fP: Treat extended data and ordinary
+data the same. Merge all substreams such that calls to
+\fIlibssh2_channel_read(3)\fP will pull from all substreams on a
+first-in/first-out basis.
+.br
+\fBLIBSSH2_CHANNEL_EXTENDED_DATA_IGNORE\fP: Discard all extended data as it 
+arrives.
+
+Change how a channel deals with extended data packets. By default all extended
+data is queued until read by \fIlibssh2_channel_read_ex(3)\fP
+.SH RETURN VALUE
+None.
+.SH SEE ALSO
+.BR libssh2_channel_handle_extended_data2(3)
+.BR libssh2_channel_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_handle_extended_data2.3

@@ -0,0 +1,35 @@
+.TH libssh2_channel_handle_extended_data2 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_handle_extended_data2 - set extended data handling mode
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_handle_extended_data2(LIBSSH2_CHANNEL *channel, int ignore_mode);
+
+.SH DESCRIPTION
+\fIchannel\fP - Active channel stream to change extended data handling on.
+
+\fIignore_mode\fP - One of the three LIBSSH2_CHANNEL_EXTENDED_DATA_* Constants.
+.br
+\fBLIBSSH2_CHANNEL_EXTENDED_DATA_NORMAL\fP: Queue extended data for eventual 
+reading
+.br
+\fBLIBSSH2_CHANNEL_EXTENDED_DATA_MERGE\fP: Treat extended data and ordinary 
+data the same. Merge all substreams such that calls to 
+.BR libssh2_channel_read(3)
+will pull from all substreams on a first-in/first-out basis.
+.br
+\fBLIBSSH2_CHANNEL_EXTENDED_DATA_IGNORE\fP: Discard all extended data as it 
+arrives.
+
+Change how a channel deals with extended data packets. By default all 
+extended data is queued until read by 
+.BR libssh2_channel_read_ex(3)
+
+.SH RETURN VALUE
+Return 0 on success or LIBSSH2_ERROR_EAGAIN when it would otherwise block.
+
+.SH SEE ALSO
+.BR libssh2_channel_handle_extended_data(3)
+.BR libssh2_channel_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_ignore_extended_data.3

@@ -0,0 +1,20 @@
+.TH libssh2_channel_ignore_extended_data 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_ignore_extended_data - convenience macro for \fIlibssh2_channel_handle_extended_data(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+libssh2_channel_ignore_extended_data(arguments)
+
+.SH DESCRIPTION
+This function is deprecated. Use the
+\fIlibssh2_channel_handle_extended_data2(3)\fP function instead!
+
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_handle_extended_data(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_handle_extended_data(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_handle_extended_data(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_handle_extended_data(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_open_ex.3

@@ -0,0 +1,54 @@
+.TH libssh2_channel_open_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_open_ex - establish a generic session channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_channel_open_ex(LIBSSH2_SESSION *session, const char *channel_type, unsigned int channel_type_len, unsigned int window_size, unsigned int packet_size, const char *message, unsigned int message_len);
+
+LIBSSH2_CHANNEL *
+libssh2_channel_open_session(session);
+
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIchannel_type\fP - Channel type to open. Typically one of session, 
+direct-tcpip, or tcpip-forward. The SSH2 protocol allowed for additional 
+types including local, custom channel types.
+
+\fIchannel_type_len\fP - Length of channel_type
+
+\fIwindow_size\fP - Maximum amount of unacknowledged data remote host is 
+allowed to send before receiving an SSH_MSG_CHANNEL_WINDOW_ADJUST packet.
+
+\fIpacket_size\fP - Maximum number of bytes remote host is allowed to send 
+in a single SSH_MSG_CHANNEL_DATA or SSG_MSG_CHANNEL_EXTENDED_DATA packet.
+
+\fImessage\fP - Additional data as required by the selected channel_type.
+
+\fImessage_len\fP - Length of message parameter.
+
+Allocate a new channel for exchanging data with the server. This method is 
+typically called through its macroized form: 
+.BR libssh2_channel_open_session(3)
+or via 
+.BR libssh2_channel_direct_tcpip(3)
+or
+.BR libssh2_channel_forward_listen(3)
+
+.SH RETURN VALUE
+Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
+
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_FAILURE\fP - 
+
+\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would block.
+
+.SH SEE ALSO
+Add related functions

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_open_session.3

@@ -0,0 +1,18 @@
+.TH libssh2_channel_open_session 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_open_session - convenience macro for \fIlibssh2_channel_open_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_channel_open_session(LIBSSH2_SESSION *session);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_open_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_open_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_open_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_process_startup.3

@@ -0,0 +1,38 @@
+.TH libssh2_channel_process_startup 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_process_startup - request a shell on a channel
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+
+int libssh2_channel_process_startup(LIBSSH2_CHANNEL *channel,
+                                    const char *request,
+                                    unsigned int request_len,
+                                    const char *message,
+                                    unsigned int message_len);
+.SH DESCRIPTION
+\fIchannel\fP - Active session channel instance.
+
+\fIrequest\fP - Type of process to startup. The SSH2 protocol currently 
+defines shell, exec, and subsystem as standard process services.
+
+\fIrequest_len\fP - Length of request parameter.
+
+\fImessage\fP - Request specific message data to include.
+
+\fImessage_len\fP - Length of message parameter.
+
+Initiate a request on a session type channel such as returned by 
+.BR libssh2_channel_open_ex(3)
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_read.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_read 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_read - convenience macro for \fIlibssh2_channel_read_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+ssize_t libssh2_channel_read(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_read_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_read_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_read_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_read_ex.3

@@ -0,0 +1,45 @@
+.TH libssh2_channel_read_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_read_ex - read data from a channel stream
+.SH SYNOPSIS
+#include <libssh2.h>
+
+ssize_t
+libssh2_channel_read_ex(LIBSSH2_CHANNEL *channel, int stream_id, char *buf, size_t buflen);
+
+ssize_t
+libssh2_channel_read(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
+
+ssize_t
+libssh2_channel_read_stderr(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
+
+.SH DESCRIPTION
+Attempt to read data from an active channel stream. All channel streams have
+one standard I/O substream (stream_id == 0), and may have up to 2^32 extended
+data streams as identified by the selected \fIstream_id\fP. The SSH2 protocol
+currently defines a stream ID of 1 to be the stderr substream.
+
+\fIchannel\fP - active channel stream to read from. 
+
+\fIstream_id\fP - substream ID number (e.g. 0 or SSH_EXTENDED_DATA_STDERR) 
+
+\fIbuf\fP - pointer to storage buffer to read data into
+
+\fIbuflen\fP - size of the buf storage
+
+\fIlibssh2_channel_read(3)\fP and \fIlibssh2_channel_read_stderr(3)\fP are
+macros.
+.SH RETURN VALUE
+Actual number of bytes read or negative on failure. It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+Note that a return value of zero (0) can in fact be a legitimate value and
+only signals that no payload data was read. It is not an error.
+.SH ERRORS
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_CLOSED\fP - The channel has been closed.
+
+.SH SEE ALSO
+.BR libssh2_poll_channel_read(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_read_stderr.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_read_stderr 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_read_stderr - convenience macro for \fIlibssh2_channel_read_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+ssize_t libssh2_channel_read_stderr(LIBSSH2_CHANNEL *channel, char *buf, size_t buflen);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_read_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_read_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_read_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_receive_window_adjust.3

@@ -0,0 +1,29 @@
+.TH libssh2_channel_receive_window_adjust 3 "15 Mar 2009" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_receive_window_adjust - adjust the channel window
+.SH SYNOPSIS
+#include <libssh2.h>
+
+unsigned long
+libssh2_channel_receive_window_adjust(LIBSSH2_CHANNEL * channel,
+                                      unsigned long adjustment,
+                                      unsigned char force);
+
+.SH DESCRIPTION
+This function is deprecated in 1.1. Use
+\fIlibssh2_channel_receive_window_adjust2(3)\fP!
+
+Adjust the receive window for a channel by adjustment bytes. If the amount to
+be adjusted is less than LIBSSH2_CHANNEL_MINADJUST and force is 0 the
+adjustment amount will be queued for a later packet.
+.SH RETURN VALUE
+Returns the new size of the receive window (as understood by remote end). Note
+that the window value sent over the wire is strictly 32bit, but this API is
+made to return a 'long' which may not be 32 bit on all platforms.
+.SH ERRORS
+In 1.0 and earlier, this function returns LIBSSH2_ERROR_EAGAIN for
+non-blocking channels where it would otherwise block. However, that is a
+negative number and this function only returns an unsigned value and this then
+leads to a very strange value being returned.
+.SH SEE ALSO
+.BR libssh2_channel_window_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_receive_window_adjust2.3

@@ -0,0 +1,27 @@
+.TH libssh2_channel_receive_window_adjust2 3 "26 Mar 2009" "libssh2 1.1" "libssh2 manual"
+.SH NAME
+libssh2_channel_receive_window_adjust2 - adjust the channel window
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int
+libssh2_channel_receive_window_adjust2(LIBSSH2_CHANNEL * channel,
+                                       unsigned long adjustment,
+                                       unsigned char force,
+                                       unsigned int *window);
+
+.SH DESCRIPTION
+Adjust the receive window for a channel by adjustment bytes. If the amount to
+be adjusted is less than LIBSSH2_CHANNEL_MINADJUST and force is 0 the
+adjustment amount will be queued for a later packet.
+
+This function stores the new size of the receive window (as understood by
+remote end) in the variable 'window' points to.
+.SH RETURN VALUE
+Return 0 on success and a negative value on error. If used in non-blocking
+mode it will return LIBSSH2_ERROR_EAGAIN when it would otherwise block.
+.SH ERRORS
+.SH AVAILABILITY
+Added in libssh2 1.1 since the previous API has deficiencies.
+.SH SEE ALSO
+.BR libssh2_channel_window_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_request_pty.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_request_pty 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_request_pty - convenience macro for \fIlibssh2_channel_request_pty_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_request_pty(LIBSSH2_SESSION *session, const char *term);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_request_pty_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_request_pty_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_request_pty_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_request_pty_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_request_pty_ex.3

@@ -0,0 +1,47 @@
+.TH libssh2_channel_request_pty_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_request_pty_ex - short function description
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_request_pty_ex(LIBSSH2_CHANNEL *channel, const char *term, unsigned int term_len, const char *modes, unsigned int modes_len, int width, int height, int width_px, int height_px);
+
+int 
+libssh2_channel_request_pty(LIBSSH2_CHANNEL *channel, char *term);
+
+.SH DESCRIPTION
+\fIchannel\fP - Previously opened channel instance such as returned by 
+.BR libssh2_channel_open_ex(3)
+
+\fIterm\fP - Terminal emulation (e.g. vt102, ansi, etc...)
+
+\fIterm_len\fP - Length of term parameter
+
+\fImodes\fP - Terminal mode modifier values
+
+\fImodes_len\fP - Length of modes parameter.
+
+\fIwidth\fP - Width of pty in characters
+
+\fIheight\fP - Height of pty in characters
+
+\fIwidth_px\fP - Width of pty in pixels
+
+\fIheight_px\fP - Height of pty in pixels
+
+Request a PTY on an established channel. Note that this does not make sense 
+for all channel types and may be ignored by the server despite returning 
+success.
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_request_pty_size.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_request_pty_size 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_request_pty_size - convenience macro for \fIlibssh2_channel_request_pty_size_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_request_pty_size(LIBSSH2_CHANNEL *channel, int width, int height);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_request_pty_size_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_request_pty_size_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_request_pty_size_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_request_pty_size_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_request_pty_size_ex.3

@@ -0,0 +1,12 @@
+.TH libssh2_channel_request_pty_size_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_request_pty_size_ex - TODO
+.SH SYNOPSIS
+
+.SH DESCRIPTION
+
+.SH RETURN VALUE
+
+.SH ERRORS
+
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_send_eof.3

@@ -0,0 +1,24 @@
+.TH libssh2_channel_send_eof 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_send_eof - send EOF to remote server
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_send_eof(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+Tell the remote host that no further data will be sent on the specified 
+channel. Processes typically interpret this as a closed stdin descriptor.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+.SH ERRORS
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+.SH SEE ALSO
+.BR libssh2_channel_wait_eof(3)
+.BR libssh2_channel_eof(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_set_blocking.3

@@ -0,0 +1,23 @@
+.TH libssh2_channel_set_blocking 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_set_blocking - set or clear blocking mode on channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void 
+libssh2_channel_set_blocking(LIBSSH2_CHANNEL *channel, int blocking);
+.SH DESCRIPTION
+\fIchannel\fP - channel stream to set or clean blocking status on.
+
+\fIblocking\fP - Set to a non-zero value to make the channel block, or zero to
+make it non-blocking.
+
+Currently this is just a short cut call to 
+.BR libssh2_session_set_blocking(3)
+and therefore will affect the session and all channels.
+.SH RETURN VALUE
+None
+.SH SEE ALSO
+.BR libssh2_session_set_blocking(3)
+.BR libssh2_channel_read_ex(3)
+.BR libssh2_channel_write_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_setenv.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_setenv 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_setenv - convenience macro for \fIlibssh2_channel_setenv_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_setenv(LIBSSH2_CHANNEL *channel, const char *varname, const char *value);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_setenv_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_setenv_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_setenv_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_setenv_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_setenv_ex.3

@@ -0,0 +1,41 @@
+.TH libssh2_channel_setenv_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_setenv_ex - set an environment variable on the channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int
+libssh2_channel_setenv_ex(LIBSSH2_CHANNEL *channel, char *varname, unsigned int varname_len, const char *value, unsigned int value_len);
+
+int
+libssh2_channel_setenv(LIBSSH2_CHANNEL *channel, char *varname, const char *value);
+
+.SH DESCRIPTION
+\fIchannel\fP - Previously opened channel instance such as returned by 
+.BR libssh2_channel_open_ex(3)
+
+\fIvarname\fP - Name of environment variable to set on the remote 
+channel instance.
+
+\fIvarname_len\fP - Length of passed varname parameter.
+
+\fIvalue\fP - Value to set varname to.
+
+\fIvalue_len\fP - Length of value parameter.
+
+Set an environment variable in the remote channel's process space. Note that
+this does not make sense for all channel types and may be ignored by the
+server despite returning success.
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_shell.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_shell 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_shell - convenience macro for \fIlibssh2_channel_process_startup(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_shell(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_process_startup(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_process_startup(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_process_startup(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_process_startup(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_subsystem.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_subsystem 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_subsystem - convenience macro for \fIlibssh2_channel_process_startup(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_subsystem(LIBSSH2_CHANNEL *channel, const char *subsystem);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_process_startup(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_process_startup(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_process_startup(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_process_startup(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_wait_closed.3

@@ -0,0 +1,22 @@
+.TH libssh2_channel_wait_closed 3 "29 Nov 2007" "libssh2 0.19" "libssh2 manual"
+.SH NAME
+libssh2_channel_wait_closed - wait for the remote to close the channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_wait_closed(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+Enter a temporary blocking state until the remote host closes the named
+channel. Typically sent after \fIlibssh2_channel_close(3)\fP in order to
+examine the exit status.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure. It returns LIBSSH2_ERROR_EAGAIN
+when it would otherwise block. While LIBSSH2_ERROR_EAGAIN is a negative
+number, it isn't really a failure per se.
+.SH SEE ALSO
+.BR libssh2_channel_send_eof(3)
+.BR libssh2_channel_eof(3)
+.BR libssh2_channel_wait_eof(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_wait_eof.3

@@ -0,0 +1,19 @@
+.TH libssh2_channel_wait_eof 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_wait_eof - wait for the remote to reply to an EOF request
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int 
+libssh2_channel_wait_eof(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+Wait for the remote end to send EOF.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure. It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH SEE ALSO
+.BR libssh2_channel_send_eof(3)
+.BR libssh2_channel_eof(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_window_read.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_window_read 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_window_read - convenience macro for \fIlibssh2_channel_window_read_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+unsigned long libssh2_channel_window_read(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_window_read_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_window_read_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_window_read_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_window_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_window_read_ex.3

@@ -0,0 +1,24 @@
+.TH libssh2_channel_window_read_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_window_read_ex - Check the status of the read window
+.SH SYNOPSIS
+#include <libssh2.h>
+
+unsigned long
+libssh2_channel_window_read_ex(LIBSSH2_CHANNEL *channel,
+                               unsigned long *read_avail,
+                               unsigned long *window_size_initial)
+.SH DESCRIPTION
+Check the status of the read window. Returns the number of bytes which the
+remote end may send without overflowing the window limit read_avail (if
+passed) will be populated with the number of bytes actually available to be
+read window_size_initial (if passed) will be populated with the
+window_size_initial as defined by the channel_open request
+.SH RETURN VALUE
+The number of bytes which the remote end may send without overflowing the
+window limit
+.SH ERRORS
+
+.SH SEE ALSO
+.BR libssh2_channel_receive_window_adjust(3),
+.BR libssh2_channel_window_write_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_window_write.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_window_write 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_window_write - convenience macro for \fIlibssh2_channel_window_write_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+unsigned long libssh2_channel_window_write(LIBSSH2_CHANNEL *channel);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_window_write_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_window_write_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_window_write_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_window_write_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_window_write_ex.3

@@ -0,0 +1,21 @@
+.TH libssh2_channel_window_write_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_window_write_ex - Check the status of the write window
+.SH SYNOPSIS
+#include <libssh2.h>
+
+unsigned long
+libssh2_channel_window_write_ex(LIBSSH2_CHANNEL *channel,
+                                unsigned long *window_size_initial)
+.SH DESCRIPTION
+Check the status of the write window Returns the number of bytes which may be
+safely written on the channel without blocking. 'window_size_initial' (if
+passed) will be populated with the size of the initial window as defined by
+the channel_open request
+.SH RETURN VALUE
+Number of bytes which may be safely written on the channel without blocking.
+.SH ERRORS
+
+.SH SEE ALSO
+.BR libssh2_channel_window_read_ex(3),
+.BR libssh2_channel_receive_window_adjust(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_write.3

@@ -0,0 +1,18 @@
+.TH libssh2_channel_write 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_write - convenience macro for \fIlibssh2_channel_write_ex(3)\fP
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+
+ssize_t libssh2_channel_write(LIBSSH2_CHANNEL *channel, const char *buf, size_t buflen);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_write_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_write_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_write_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_write_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_write_ex.3

@@ -0,0 +1,47 @@
+.TH libssh2_channel_write_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_write_ex - write data to a channel stream blocking
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+
+ssize_t libssh2_channel_write_ex(LIBSSH2_CHANNEL *channel,
+                                 int stream_id, char *buf,
+                                 size_t buflen);
+.SH DESCRIPTION
+Write data to a channel stream. All channel streams have one standard I/O
+substream (stream_id == 0), and may have up to 2^32 extended data streams as
+identified by the selected \fIstream_id\fP. The SSH2 protocol currently
+defines a stream ID of 1 to be the stderr substream.
+
+\fIchannel\fP - active channel stream to write to. 
+
+\fIstream_id\fP - substream ID number (e.g. 0 or SSH_EXTENDED_DATA_STDERR) 
+
+\fIbuf\fP - pointer to buffer to write
+
+\fIbuflen\fP - size of the data to write
+
+\fIlibssh2_channel_write(3)\fP and \fIlibssh2_channel_write_stderr(3)\fP are
+convenience macros for this function.
+
+\fIlibssh2_channel_write_ex(3)\fP will use as much as possible of the buffer
+and put it into a single SSH protocol packet. This means that to get maximum
+performance when sending larger files, you should try to always pass in at
+least 32K of data to this function.
+.SH RETURN VALUE
+Actual number of bytes written or negative on failure.
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP - An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_CLOSED\fP - The channel has been closed.
+
+\fILIBSSH2_ERROR_CHANNEL_EOF_SENT\fP - The channel has been requested to be
+closed.
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)
+.BR libssh2_channel_read_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_write_stderr.3

@@ -0,0 +1,18 @@
+.TH libssh2_channel_write_stderr 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_write_stderr - convenience macro for \fIlibssh2_channel_write_ex(3)\fP
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+
+ssize_t libssh2_channel_write_stderr(LIBSSH2_CHANNEL *channel, const char *buf, size_t buflen);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_write_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_write_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_write_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_write_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_x11_req.3

@@ -0,0 +1,17 @@
+.TH libssh2_channel_x11_req 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_channel_x11_req - convenience macro for \fIlibssh2_channel_x11_req_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_channel_x11_req(LIBSSH2_CHANNEL *channel, int screen_number);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_channel_x11_req_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_channel_x11_req_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_channel_x11_req_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_channel_x11_req_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_channel_x11_req_ex.3

@@ -0,0 +1,44 @@
+.TH libssh2_channel_x11_req_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_channel_x11_req_ex - request an X11 forwarding channel
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int
+libssh2_channel_x11_req_ex(LIBSSH2_CHANNEL *channel, int single_connection, const char *auth_proto, const char *auth_cookie, int screen_number);
+
+int
+libssh2_channel_x11_req(LIBSSH2_CHANNEL *channel, int screen_number);
+
+.SH DESCRIPTION
+\fIchannel\fP - Previously opened channel instance such as returned by 
+.BR libssh2_channel_open_ex(3)
+
+\fIsingle_connection\fP - non-zero to only forward a single connection.
+
+\fIauth_proto\fP - X11 authentication protocol to use
+
+\fIauth_cookie\fP - the cookie (hexadecimal encoded).
+
+\fIscreen_number\fP - the XLL screen to forward
+
+Request an X11 forwarding on \fIchannel\fP. To use X11 forwarding, 
+.BR libssh2_session_callback_set(3)
+must first be called to set \fBLIBSSH2_CALLBACK_X11\fP. This callback will be
+invoked when the remote host accepts the X11 forwarding.
+
+.SH RETURN VALUE
+Return 0 on success or negative on failure.  It returns
+LIBSSH2_ERROR_EAGAIN when it would otherwise block. While
+LIBSSH2_ERROR_EAGAIN is a negative number, it isn't really a failure per se.
+
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SOCKET_SEND\fP - Unable to send data on socket.
+
+\fILIBSSH2_ERROR_CHANNEL_REQUEST_DENIED\fP - 
+
+.SH SEE ALSO
+.BR libssh2_channel_open_ex(3)
+.BR libssh2_session_callback_set(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_exit.3

@@ -0,0 +1,14 @@
+.TH libssh2_exit 3 "19 Mar 2010" "libssh2 1.2.5" "libssh2 manual"
+.SH NAME
+libssh2_exit - global library deinitialization
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void
+libssh2_exit(void);
+.SH DESCRIPTION
+Exit the libssh2 functions and free's all memory used internal.
+.SH AVAILABILITY
+Added in libssh2 1.2.5
+.SH SEE ALSO
+.BR libssh2_init(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_free.3

@@ -0,0 +1,19 @@
+.TH libssh2_exit 3 "13 Oct 2010" "libssh2 1.2.8" "libssh2 manual"
+.SH NAME
+libssh2_free - deallocate libssh2 memory
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void
+libssh2_free(LIBSSH2_SESSION *session, void *ptr);
+.SH DESCRIPTION
+Deallocate memory allocated by earlier call to libssh2 functions.  It
+uses the memory allocation callbacks provided by the application, if
+any.  Otherwise, this will just call free().
+
+This function is mostly useful under Windows when libssh2 is linked to
+one run-time library and the application to another.
+.SH AVAILABILITY
+Added in libssh2 1.2.8
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_hostkey_hash.3

@@ -0,0 +1,26 @@
+.TH libssh2_hostkey_hash 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_hostkey_hash - return a hash of the remote host's key
+.SH SYNOPSIS
+#include <libssh2.h>
+
+const char *
+libssh2_hostkey_hash(LIBSSH2_SESSION *session, int hash_type);
+
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIhash_type\fP - One of: \fBLIBSSH2_HOSTKEY_HASH_MD5\fP, 
+\fBLIBSSH2_HOSTKEY_HASH_SHA1\fP or \fBLIBSSH2_HOSTKEY_HASH_SHA256\fP.
+
+Returns the computed digest of the remote system's hostkey. The length of 
+the returned string is hash_type specific (e.g. 16 bytes for MD5, 
+20 bytes for SHA1, 32 bytes for SHA256).
+.SH RETURN VALUE
+Computed hostkey hash value, or NULL if the information is not available
+(either the session has not yet been started up, or the requested hash
+algorithm was not available). The hash consists of raw binary bytes, not hex
+digits, so it is not directly printable.
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_init.3

@@ -0,0 +1,20 @@
+.TH libssh2_init 3 "19 Mar 2010" "libssh2 1.2.5" "libssh2 manual"
+.SH NAME
+libssh2_init - global library initialization
+.SH SYNOPSIS
+#include <libssh2.h>
+
+#define LIBSSH2_INIT_NO_CRYPTO 0x0001
+
+int
+libssh2_init(int flags);
+.SH DESCRIPTION
+Initialize the libssh2 functions.  This typically initialize the
+crypto library.  It uses a global state, and is not thread safe -- you
+must make sure this function is not called concurrently.
+.SH RETURN VALUE
+Returns 0 if succeeded, or a negative value for error.
+.SH AVAILABILITY
+Added in libssh2 1.2.5
+.SH SEE ALSO
+.BR libssh2_exit(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_keepalive_config.3

@@ -0,0 +1,27 @@
+.TH libssh2_keepalive_config 3 "12 Apr 2011" "libssh2 1.2.5" "libssh2 manual"
+.SH NAME
+libssh2_keepalive_config - short function description
+.SH SYNOPSIS
+#include <libssh2.h>
+.nf
+
+void libssh2_keepalive_config(LIBSSH2_SESSION *session,
+                              int want_reply,
+                              unsigned interval);
+.fi
+.SH DESCRIPTION
+Set how often keepalive messages should be sent. \fBwant_reply\fP indicates
+whether the keepalive messages should request a response from the server.
+\fBinterval\fP is number of seconds that can pass without any I/O, use 0 (the
+default) to disable keepalives.  To avoid some busy-loop corner-cases, if you
+specify an interval of 1 it will be treated as 2.
+
+Note that non-blocking applications are responsible for sending the keepalive
+messages using \fBlibssh2_keepalive_send(3)\fP.
+.SH RETURN VALUE
+Nothing
+.SH AVAILABILITY
+Added in libssh2 1.2.5
+.SH SEE ALSO
+.BR libssh2_keepalive_send(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_keepalive_send.3

@@ -0,0 +1,18 @@
+.TH libssh2_keepalive_send 3 "13 Apr 2011" "libssh2 1.2.5" "libssh2 manual"
+.SH NAME
+libssh2_keepalive_send - short function description
+.SH SYNOPSIS
+#include <libssh2.h>
+.nf
+
+int libssh2_keepalive_send(LIBSSH2_SESSION *session,
+                           int *seconds_to_next);
+.SH DESCRIPTION
+Send a keepalive message if needed.  \fBseconds_to_next\fP indicates how many
+seconds you can sleep after this call before you need to call it again.
+.SH RETURN VALUE
+Returns 0 on success, or LIBSSH2_ERROR_SOCKET_SEND on I/O errors.
+.SH AVAILABILITY
+Added in libssh2 1.2.5
+.SH SEE ALSO
+.BR libssh2_keepalive_config(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_add.3

@@ -0,0 +1,66 @@
+
+.\" Copyright (c) 2009, 2010 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_add 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_add - add a known host
+.SH SYNOPSIS
+.nf
+#include <libssh2.h>
+
+int libssh2_knownhost_add(LIBSSH2_KNOWNHOSTS *hosts,
+                          char *host, char *salt,
+                          char *key, size_t keylen,
+                          int typemask,
+                          struct libssh2_knownhost **store);
+.SH DESCRIPTION
+We discourage use of this function as of libssh2 1.2.5. Instead we strongly
+urge users to use \fIlibssh2_knownhost_addc(3)\fP instead, which as a more
+complete API. \fIlibssh2_knownhost_add(3)\fP is subject for removal in a
+future release.
+
+Adds a known host to the collection of known hosts identified by the 'hosts'
+handle.
+
+\fIhost\fP is a pointer the host name in plain text or hashed. If hashed, it
+must be provided base64 encoded. The host name can be the IP numerical address
+of the host or the full name.
+
+\fIsalt\P is a pointer to the salt used for the host hashing, if the host is
+provided hashed. If the host is provided in plain text, salt has no meaning.
+The salt has to be provided base64 encoded with a trailing zero byte.
+
+\fIkey\fP is a pointer to the key for the given host.
+
+\fIkeylen\fP is the total size in bytes of the key pointed to by the \fIkey\fP
+argument
+
+\fItypemask\fP is a bitmask that specifies format and info about the data
+passed to this function. Specifically, it details what format the host name is,
+what format the key is and what key type it is.
+
+The host name is given as one of the following types:
+LIBSSH2_KNOWNHOST_TYPE_PLAIN, LIBSSH2_KNOWNHOST_TYPE_SHA1 or
+LIBSSH2_KNOWNHOST_TYPE_CUSTOM.
+
+The key is encoded using one of the following encodings:
+LIBSSH2_KNOWNHOST_KEYENC_RAW or LIBSSH2_KNOWNHOST_KEYENC_BASE64.
+
+The key is using one of these algorithms:
+LIBSSH2_KNOWNHOST_KEY_RSA1, LIBSSH2_KNOWNHOST_KEY_SSHRSA or
+LIBSSH2_KNOWNHOST_KEY_SSHDSS.
+
+\fIstore\fP should point to a pointer that gets filled in to point to the
+known host data after the addition. NULL can be passed if you don't care about
+this pointer.
+.SH RETURN VALUE
+Returns a regular libssh2 error code, where negative values are error codes
+and 0 indicates success.
+.SH AVAILABILITY
+Added in libssh2 1.2, deprecated since libssh2 1.2.5. Use
+\fIlibssh2_knownhost_addc(3)\fP instead!
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_check(3)
+.BR libssh2_knownhost_addc(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_addc.3

@@ -0,0 +1,68 @@
+
+.\" Copyright (c) 2009, 2010 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_add 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_add - add a known host
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_addc(LIBSSH2_KNOWNHOSTS *hosts,
+                           char *host, char *salt,
+                           char *key, size_t keylen,
+                           const char *comment, size_t commentlen,
+                           int typemask,
+                           struct libssh2_knownhost **store);
+.SH DESCRIPTION
+Adds a known host to the collection of known hosts identified by the 'hosts'
+handle.
+
+\fIhost\fP is a pointer the host name in plain text or hashed. If hashed, it
+must be provided base64 encoded. The host name can be the IP numerical address
+of the host or the full name.
+
+If you want to add a key for a specific port number for the given host, you
+must provide the host name like '[host]:port' with the actual characters '['
+and ']' enclosing the host name and a colon separating the host part from the
+port number. For example: \&"[host.example.com]:222".
+
+\fIsalt\fP is a pointer to the salt used for the host hashing, if the host is
+provided hashed. If the host is provided in plain text, salt has no meaning.
+The salt has to be provided base64 encoded with a trailing zero byte.
+
+\fIkey\fP is a pointer to the key for the given host.
+
+\fIkeylen\fP is the total size in bytes of the key pointed to by the \fIkey\fP
+argument
+
+\fIcomment\fP is a pointer to a comment for the key.
+
+\fIcommentlen\fP is the total size in bytes of the comment pointed to by the \fIcomment\fP argument
+
+\fItypemask\fP is a bitmask that specifies format and info about the data
+passed to this function. Specifically, it details what format the host name is,
+what format the key is and what key type it is.
+
+The host name is given as one of the following types:
+LIBSSH2_KNOWNHOST_TYPE_PLAIN, LIBSSH2_KNOWNHOST_TYPE_SHA1 or
+LIBSSH2_KNOWNHOST_TYPE_CUSTOM.
+
+The key is encoded using one of the following encodings:
+LIBSSH2_KNOWNHOST_KEYENC_RAW or LIBSSH2_KNOWNHOST_KEYENC_BASE64.
+
+The key is using one of these algorithms:
+LIBSSH2_KNOWNHOST_KEY_RSA1, LIBSSH2_KNOWNHOST_KEY_SSHRSA or
+LIBSSH2_KNOWNHOST_KEY_SSHDSS.
+
+\fIstore\fP should point to a pointer that gets filled in to point to the
+known host data after the addition. NULL can be passed if you don't care about
+this pointer.
+.SH RETURN VALUE
+Returns a regular libssh2 error code, where negative values are error codes
+and 0 indicates success.
+.SH AVAILABILITY
+Added in libssh2 1.2.5
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_check(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_check.3

@@ -0,0 +1,58 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_check 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_check - check a host+key against the list of known hosts
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_check(LIBSSH2_KNOWNHOSTS *hosts,
+                            const char *host,
+                            const char *key, size_t keylen,
+                            int typemask,
+                            struct libssh2_knownhost **knownhost);
+.SH DESCRIPTION
+Checks a host and its associated key against the collection of known hosts,
+and returns info back about the (partially) matched entry.
+
+\fIhost\fP is a pointer the host name in plain text. The host name can be the
+IP numerical address of the host or the full name.
+
+\fIkey\fP is a pointer to the key for the given host.
+
+\fIkeylen\fP is the total size in bytes of the key pointed to by the \fIkey\fP
+argument
+
+\fItypemask\fP is a bitmask that specifies format and info about the data
+passed to this function. Specifically, it details what format the host name is,
+what format the key is and what key type it is.
+
+The host name is given as one of the following types:
+LIBSSH2_KNOWNHOST_TYPE_PLAIN or LIBSSH2_KNOWNHOST_TYPE_CUSTOM.
+
+The key is encoded using one of the following encodings:
+LIBSSH2_KNOWNHOST_KEYENC_RAW or LIBSSH2_KNOWNHOST_KEYENC_BASE64.
+
+\fIknownhost\fP if set to non-NULL, it must be a pointer to a 'struct
+libssh2_knownhost' pointer that gets filled in to point to info about a known
+host that matches or partially matches.
+.SH RETURN VALUE
+\fIlibssh2_knownhost_check(3)\fP returns info about how well the provided
+host + key pair matched one of the entries in the list of known hosts.
+
+LIBSSH2_KNOWNHOST_CHECK_FAILURE - something prevented the check to be made
+
+LIBSSH2_KNOWNHOST_CHECK_NOTFOUND - no host match was found
+
+LIBSSH2_KNOWNHOST_CHECK_MATCH - hosts and keys match.
+
+LIBSSH2_KNOWNHOST_CHECK_MISMATCH - host was found, but the keys didn't match!
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH EXAMPLE
+See the ssh2_exec.c example as provided in the tarball.
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_add(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_checkp.3

@@ -0,0 +1,63 @@
+.\"
+.\" Copyright (c) 2009-2010 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_check 3 "1 May 2010" "libssh2 1.2.6" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_checkp - check a host+key against the list of known hosts
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_checkp(LIBSSH2_KNOWNHOSTS *hosts,
+                             const char *host, int port,
+                             const char *key, size_t keylen,
+                             int typemask,
+                             struct libssh2_knownhost **knownhost);
+.SH DESCRIPTION
+Checks a host and its associated key against the collection of known hosts,
+and returns info back about the (partially) matched entry.
+
+\fIhost\fP is a pointer the host name in plain text. The host name can be the
+IP numerical address of the host or the full name.
+
+\fIport\fP is the port number used by the host (or a negative number
+to check the generic host). If the port number is given, libssh2 will
+check the key for the specific host + port number combination in
+addition to the plain host name only check.
+
+\fIkey\fP is a pointer to the key for the given host.
+
+\fIkeylen\fP is the total size in bytes of the key pointed to by the \fIkey\fP
+argument
+
+\fItypemask\fP is a bitmask that specifies format and info about the data
+passed to this function. Specifically, it details what format the host name is,
+what format the key is and what key type it is.
+
+The host name is given as one of the following types:
+LIBSSH2_KNOWNHOST_TYPE_PLAIN or LIBSSH2_KNOWNHOST_TYPE_CUSTOM.
+
+The key is encoded using one of the following encodings:
+LIBSSH2_KNOWNHOST_KEYENC_RAW or LIBSSH2_KNOWNHOST_KEYENC_BASE64.
+
+\fIknownhost\fP if set to non-NULL, it must be a pointer to a 'struct
+libssh2_knownhost' pointer that gets filled in to point to info about a known
+host that matches or partially matches.
+.SH RETURN VALUE
+\fIlibssh2_knownhost_check(3)\fP returns info about how well the provided
+host + key pair matched one of the entries in the list of known hosts.
+
+LIBSSH2_KNOWNHOST_CHECK_FAILURE - something prevented the check to be made
+
+LIBSSH2_KNOWNHOST_CHECK_NOTFOUND - no host match was found
+
+LIBSSH2_KNOWNHOST_CHECK_MATCH - hosts and keys match.
+
+LIBSSH2_KNOWNHOST_CHECK_MISMATCH - host was found, but the keys didn't match!
+.SH AVAILABILITY
+Added in libssh2 1.2.6
+.SH EXAMPLE
+See the ssh2_exec.c example as provided in the tarball.
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_add(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_del.3

@@ -0,0 +1,26 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_del 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_del - delete a known host entry
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_del(LIBSSH2_KNOWNHOSTS *hosts,
+                          struct libssh2_knownhost *entry);
+.SH DESCRIPTION
+Delete a known host entry from the collection of known hosts.
+
+\fIentry\fP is a pointer to a struct that you can extract with
+\fIlibssh2_knownhost_check(3)\fP or \fIlibssh2_knownhost_get(3)\fP.
+.SH RETURN VALUE
+Returns a regular libssh2 error code, where negative values are error codes
+and 0 indicates success.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_add(3)
+.BR libssh2_knownhost_check(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_free.3

@@ -0,0 +1,20 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_free 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_free - free a collection of known hosts
+.SH SYNOPSIS
+#include <libssh2.h>
+
+void libssh2_knownhost_free(LIBSSH2_KNOWNHOSTS *hosts);
+.SH DESCRIPTION
+Free a collection of known hosts.
+.SH RETURN VALUE
+None.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_add(3)
+.BR libssh2_knownhost_check(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_get.3

@@ -0,0 +1,35 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_get 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_get - get a known host off the collection of known hosts
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_get(LIBSSH2_KNOWNHOSTS *hosts,
+                          struct libssh2_knownhost **store,
+                          struct libssh2_knownhost *prev):
+.SH DESCRIPTION
+\fIlibssh2_knownhost_get(3)\fP allows an application to iterate over all known
+hosts in the collection.
+
+\fIstore\fP should point to a pointer that gets filled in to point to the
+known host data.
+
+\fIprev\fP is a pointer to a previous 'struct libssh2_knownhost' as returned
+by a previous invoke of this function, or NULL to get the first entry in the
+internal collection.
+.SH RETURN VALUE
+Returns 0 if everything is fine and information about a host was stored in
+the \fIstore\fP struct.
+
+Returns 1 if it reached the end of hosts.
+
+Returns negative values for error
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_readfile(3)
+.BR libssh2_knownhost_writefile(3)
+.BR libssh2_knownhost_add(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_init.3

@@ -0,0 +1,25 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_init 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_init - init a collection of known hosts
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_KNOWNHOSTS *libssh2_knownhost_init(LIBSSH2_SESSION *session);
+.SH DESCRIPTION
+Init a collection of known hosts for this session. Returns the handle to an
+internal representation of a known host collection.
+
+Call \fBlibssh2_knownhost_free(3)\fP to free the collection again after you're
+doing using it.
+.SH RETURN VALUE
+Returns a handle pointer or NULL if something went wrong. The returned handle
+is used as input to all other known host related functions libssh2 provides.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_add(3)
+.BR libssh2_knownhost_check(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_readfile.3

@@ -0,0 +1,29 @@
+.\"
+.\" Copyright (c) 2009-2011 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_readfile 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_readfile - parse a file of known hosts
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_readfile(LIBSSH2_KNOWNHOSTS *hosts,
+                               const char *filename, int type);
+.SH DESCRIPTION
+Reads a collection of known hosts from a specified file and adds them to the
+collection of known hosts.
+
+\fIfilename\fP specifies which file to read
+
+\fItype\fP specifies what file type it is, and
+\fILIBSSH2_KNOWNHOST_FILE_OPENSSH\fP is the only currently supported
+format. This file is normally found named ~/.ssh/known_hosts
+.SH RETURN VALUE
+Returns a negative value, a regular libssh2 error code for errors, or a
+positive number as number of parsed known hosts in the file.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_init(3)
+.BR libssh2_knownhost_free(3)
+.BR libssh2_knownhost_check(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_readline.3

@@ -0,0 +1,30 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_readline 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_readline - read a known host line
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_readline(LIBSSH2_KNOWNHOSTS *hosts,
+                               const char *line, size_t len, int type):
+.SH DESCRIPTION
+Tell libssh2 to read a buffer as it if is a line from a known hosts file.
+
+\fIline\fP points to the start of the line
+
+\fIlen\fP is the length of the line in bytes
+
+\fItype\fP specifies what file type it is, and
+\fILIBSSH2_KNOWNHOST_FILE_OPENSSH\fP is the only currently supported
+format. This file is normally found named ~/.ssh/known_hosts
+.SH RETURN VALUE
+Returns a regular libssh2 error code, where negative values are error codes
+and 0 indicates success.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_get(3)
+.BR libssh2_knownhost_writeline(3)
+.BR libssh2_knownhost_readfile(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_writefile.3

@@ -0,0 +1,29 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_writefile 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_writefile - write a collection of known hosts to a file
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_knownhost_writefile(LIBSSH2_KNOWNHOSTS *hosts,
+                                const char *filename, int type);
+.SH DESCRIPTION
+Writes all the known hosts to the specified file using the specified file
+format.
+
+\fIfilename\fP specifies what filename to create
+
+\fItype\fP specifies what file type it is, and
+\fILIBSSH2_KNOWNHOST_FILE_OPENSSH\fP is the only currently supported
+format.
+.SH RETURN VALUE
+Returns a regular libssh2 error code, where negative values are error codes
+and 0 indicates success.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_readfile(3)
+.BR libssh2_knownhost_add(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_knownhost_writeline.3

@@ -0,0 +1,46 @@
+.\"
+.\" Copyright (c) 2009 by Daniel Stenberg
+.\"
+.TH libssh2_knownhost_writeline 3 "28 May 2009" "libssh2 1.2" "libssh2 manual"
+.SH NAME
+libssh2_knownhost_writeline - convert a known host to a line for storage
+.SH SYNOPSIS
+#include <libssh2.h>
+
+libssh2_knownhost_writeline(LIBSSH2_KNOWNHOSTS *hosts,
+                            struct libssh2_knownhost *known,
+                            char *buffer, size_t buflen,
+                            size_t *outlen,
+                            int type);
+.SH DESCRIPTION
+Converts a single known host to a single line of output for storage, using
+the 'type' output format.
+
+\fIknown\fP identifies which particular known host
+
+\fIbuffer\fP points to an allocated buffer
+
+\fIbuflen\fP is the size of the \fIbuffer\fP. See RETURN VALUE about the size.
+
+\fIoutlen\fP must be a pointer to a size_t variable that will get the output
+length of the stored data chunk. The number does not included the trailing
+zero!
+
+\fItype\fP specifies what file type it is, and
+\fILIBSSH2_KNOWNHOST_FILE_OPENSSH\fP is the only currently supported
+format.
+.SH RETURN VALUE
+Returns a regular libssh2 error code, where negative values are error codes
+and 0 indicates success.
+
+If the provided buffer is deemed too small to fit the data libssh2 wants to
+store in it, LIBSSH2_ERROR_BUFFER_TOO_SMALL will be returned. The application
+is then advised to call the function again with a larger buffer. The
+\fIoutlen\fP size will then hold the requested size.
+.SH AVAILABILITY
+Added in libssh2 1.2
+.SH SEE ALSO
+.BR libssh2_knownhost_get(3)
+.BR libssh2_knownhost_readline(3)
+.BR libssh2_knownhost_writefile(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_poll.3

@@ -0,0 +1,21 @@
+.TH libssh2_poll 3 "14 Dec 2006" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_poll - poll for activity on a socket, channel or listener
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_poll(LIBSSH2_POLLFD *fds, unsigned int nfds, long timeout);
+.SH DESCRIPTION
+This function is deprecated. Do note use. We encourage users to instead use
+the \fIpoll(3)\fP or \fIselect(3)\fP functions to check for socket activity or
+when specific sockets are ready to get received from or send to.
+
+Poll for activity on a socket, channel, listener, or any combination of these
+three types. The calling semantics for this function generally match
+\fIpoll(2)\fP however the structure of fds is somewhat more complex in order
+to accommodate the disparate datatypes, POLLFD constants have been namespaced
+to avoid platform discrepancies, and revents has additional values defined.
+.SH "RETURN VALUE"
+Number of fds with interesting events.
+.SH SEE ALSO
+.BR libssh2_poll_channel_read(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_poll_channel_read.3

@@ -0,0 +1,18 @@
+.TH libssh2_poll_channel_read 3 "14 Dec 2006" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_poll_channel_read - check if data is available
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_poll_channel_read(LIBSSH2_CHANNEL *channel, int extended);
+.SH DESCRIPTION
+This function is deprecated. Do note use.
+
+\fIlibssh2_poll_channel_read(3)\fP checks to see if data is available in the
+\fIchannel\fP's read buffer. No attempt is made with this method to see if
+packets are available to be processed. For full polling support, use
+\fIlibssh2_poll(3)\fP.
+.SH RETURN VALUE
+Returns 1 when data is available and 0 otherwise.
+.SH SEE ALSO
+.BR libssh2_poll(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_add.3

@@ -0,0 +1,20 @@
+.TH libssh2_publickey_add 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_publickey_add - convenience macro for \fIlibssh2_publickey_add_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_publickey_add(LIBSSH2_PUBLICKEY *pkey,
+			  const unsigned char *name,
+                          const unsigned char *blob, unsigned long blob_len, char overwrite,
+                          unsigned long num_attrs, const libssh2_publickey_attribute attrs[]);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_publickey_add_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_publickey_add_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_publickey_add_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_publickey_add_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_add_ex.3

@@ -0,0 +1,25 @@
+.TH libssh2_publickey_add_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_publickey_add_ex - Add a public key entry
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int
+libssh2_publickey_add_ex(LIBSSH2_PUBLICKEY *pkey, const unsigned char *name,
+                         unsigned long name_len, const unsigned char *blob,
+                         unsigned long blob_len, char overwrite,
+                         unsigned long num_attrs,
+                         const libssh2_publickey_attribute attrs[])
+
+.SH DESCRIPTION
+TBD
+.SH RETURN VALUE
+Returns 0 on success, negative on failure.
+.SH ERRORS
+LIBSSH2_ERROR_BAD_USE
+LIBSSH2_ERROR_ALLOC,
+LIBSSH2_ERROR_EAGAIN
+LIBSSH2_ERROR_SOCKET_SEND,
+LIBSSH2_ERROR_SOCKET_TIMEOUT,
+LIBSSH2_ERROR_PUBLICKEY_PROTOCOL,
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_init.3

@@ -0,0 +1,12 @@
+.TH libssh2_publickey_init 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_publickey_init - TODO
+.SH SYNOPSIS
+
+.SH DESCRIPTION
+
+.SH RETURN VALUE
+
+.SH ERRORS
+
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_list_fetch.3

@@ -0,0 +1,12 @@
+.TH libssh2_publickey_list_fetch 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_publickey_list_fetch - TODO
+.SH SYNOPSIS
+
+.SH DESCRIPTION
+
+.SH RETURN VALUE
+
+.SH ERRORS
+
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_list_free.3

@@ -0,0 +1,12 @@
+.TH libssh2_publickey_list_free 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_publickey_list_free - TODO
+.SH SYNOPSIS
+
+.SH DESCRIPTION
+
+.SH RETURN VALUE
+
+.SH ERRORS
+
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_remove.3

@@ -0,0 +1,19 @@
+.TH libssh2_publickey_remove 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_publickey_remove - convenience macro for \fIlibssh2_publickey_remove_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+int libssh2_publickey_remove(LIBSSH2_PUBLICKEY *pkey,
+			     const unsigned char *name, unsigned long name_len,
+			     const unsigned char *blob, unsigned long blob_len);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_publickey_remove_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_publickey_remove_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_publickey_remove_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_publickey_remove_ex(3)

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_remove_ex.3

@@ -0,0 +1,12 @@
+.TH libssh2_publickey_list_remove_ex 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_publickey_list_remove_ex - TODO
+.SH SYNOPSIS
+
+.SH DESCRIPTION
+
+.SH RETURN VALUE
+
+.SH ERRORS
+
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_publickey_shutdown.3

@@ -0,0 +1,12 @@
+.TH libssh2_publickey_shutdown 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_publickey_shutdown - TODO
+.SH SYNOPSIS
+
+.SH DESCRIPTION
+
+.SH RETURN VALUE
+
+.SH ERRORS
+
+.SH SEE ALSO

node_modules/nodegit/vendor/libssh2/docs/libssh2_scp_recv.3

@@ -0,0 +1,35 @@
+.TH libssh2_scp_recv 3 "1 Jun 2007" "libssh2 0.15" "libssh2 manual"
+.SH NAME
+libssh2_scp_recv - request a remote file via SCP
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_scp_recv(LIBSSH2_SESSION *session, const char *path, struct stat *sb);
+
+.SH DESCRIPTION
+This function is \fBDEPRECATED\fP. Use \fIlibssh2_scp_recv2(3)\fP
+instead!
+
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIpath\fP - Full path and filename of file to transfer. That is the remote
+file name.
+
+\fIsb\fP - Populated with remote file's size, mode, mtime, and atime
+
+Request a file from the remote host via SCP.
+.SH RETURN VALUE
+Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SCP_PROTOCOL\fP - 
+
+\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would
+block.
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)
+.BR libssh2_channel_open_ex(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_scp_recv2.3

@@ -0,0 +1,32 @@
+.TH libssh2_scp_recv2 3 "29 Jun 2015" "libssh2 1.6.1" "libssh2 manual"
+.SH NAME
+libssh2_scp_recv2 - request a remote file via SCP
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_scp_recv2(LIBSSH2_SESSION *session, const char *path, struct_stat *sb);
+
+.SH DESCRIPTION
+\fIsession\fP - Session instance as returned by 
+.BR libssh2_session_init_ex(3)
+
+\fIpath\fP - Full path and filename of file to transfer. That is the remote
+file name.
+
+\fIsb\fP - Populated with remote file's size, mode, mtime, and atime
+
+Request a file from the remote host via SCP.
+.SH RETURN VALUE
+Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
+.SH ERRORS
+\fILIBSSH2_ERROR_ALLOC\fP -  An internal memory allocation call failed.
+
+\fILIBSSH2_ERROR_SCP_PROTOCOL\fP - 
+
+\fILIBSSH2_ERROR_EAGAIN\fP - Marked for non-blocking I/O but the call would
+block.
+.SH SEE ALSO
+.BR libssh2_session_init_ex(3)
+.BR libssh2_channel_open_ex(3)
+

node_modules/nodegit/vendor/libssh2/docs/libssh2_scp_send.3

@@ -0,0 +1,18 @@
+.TH libssh2_scp_send 3 "20 Feb 2010" "libssh2 1.2.4" "libssh2 manual"
+.SH NAME
+libssh2_scp_send - convenience macro for \fIlibssh2_scp_send_ex(3)\fP calls
+.SH SYNOPSIS
+#include <libssh2.h>
+
+LIBSSH2_CHANNEL *
+libssh2_scp_send(LIBSSH2_SESSION *session, const char *path, int mode, size_t size);
+
+.SH DESCRIPTION
+This is a macro defined in a public libssh2 header file that is using the
+underlying function \fIlibssh2_scp_send_ex(3)\fP.
+.SH RETURN VALUE
+See \fIlibssh2_scp_send_ex(3)\fP
+.SH ERRORS
+See \fIlibssh2_scp_send_ex(3)\fP
+.SH SEE ALSO
+.BR libssh2_scp_send_ex(3)